Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

System Configuration Example

The following example shows incremental configurations and their corresponding ACL resource consumption taken on a BlackDiamond 8800 switch with an a-series card.
  • Default configuration including: dot1p examination and IGMP snooping:
    • 2 slices, 10 rules
  • Add an IP interface to the configuration:
    • 2 slices, 13 rules
  • Add port-based QoS to the configuration:
    • 2 slices, 14 rules
  • Add VLAN-based QoS to the configuration:
    • 2 slices, 15 rules
  • Add VRRP to the configuration:
    • 2 slices, 17 rules
  • Add EAPS (Master mode) to the configuration:
    • 2 slices, 18 rules
  • Add ESRP to the configuration:
    • 2 slices, 21 rules
  • Add IPv6 routing (slowpath) to the configuration:
    • 4 slices, 24 rules
  • Add Netlogin to the configuration:
    • 5 slices, 25 rules
Note

Note

The slice and rule usage numbers given in this section are for the ExtremeXOS 12.4.1 release. They may vary slightly depending on the ExtremeXOS release.
Published March 1, 2020prev | next

Email this topicEmail this topic

Print this pagePrint this page