This command shows the configured settings and statistics for the process groups.
| vital | Shows configured settings and statistics for the "Vital" process group. |
| other | Shows configured settings and statistics for the "Other" process group. |
If you do not select a process group ("Vital" or "Other"), information for both process groups appears.
The following example shows information about both the "Vital" and "Other" process groups:
# show process group
Number of processes : 72
CPU
Limit : 90 %
Current utilization : 1.2 %
Maximum utilization : 29.1 %
Memory
Upper Limit : 95 %
Current utilization : 3.9 %
Maximum utilization : 3.9 %
Number of processes killed by EPM : 0
Other:
Number of processes : 1
CPU
Limit : 10 %
Current utilization : 0.0 %
Maximum utilization : 0.0 %
Memory
Upper Limit : 5 %
Current utilization : 0.0 %
Maximum utilization : 0.0 %
Number of processes killed by EPM : 0
This command was first available in ExtremeXOS 22.2.
The exos option was removed in ExtremeXOS 31.5.
The vital option was first available in ExtremeXOS 31.5
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5420, and 5520 series switches.