Use this command to display a list of currently supported traffic rules applied to the administrative profile for one or more ports.
| allowed-type | Show the list of currently supported and allowed traffic rules applied to the admin rules for each dot1D bridge ports. |
| ports | Port list. |
| detail | Displays all information in detail. |
If detail is not specified, summary information is displayed.
The show policy allowed-type command output displays traffic rule types in attribute ID order (1–31) from left to right. Traffic rule type precedence defaults to the attribute ID order.
The show policy allowed-type command specifies two categories of traffic rule type: supported and allowed. Supported indicates whether the specified port supports the traffic rule type. Allowed is an administrative function. By default, all supported traffic rule types are allowed on the port.
This command was first available in ExtremeXOS 16.1.
This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, X870, 5420, and 5520 series switches.