show iqagent

show iqagent discovery

Description

Displays information about the ExtremeCloud™ IQ Agent.

Syntax Description

iqagent Specifies showing information about IQ Agent.
discovery Specifies showing information about IQ Agent discovery.

Default

N/A.

Usage Guidelines

If IQ Agent is not running, only the first section appears. A device is registered on an IQ server using the serial number.

Example

The following example shows information about IQ Agent:

# show iqagent
----------------------------------  --------------------------------------------
State                               Enabled
Active VR                           VR-Mgmt
Detected VR                         VR-Mgmt
XIQ Address                         10.16.231.95
Serial Number                       1405G-00056
----------------------------------  --------------------------------------------

The following example shows discovery information for IQ Agent:

# show iqagent discovery
-----------------------------------------------------------------------------
Virtual-Router  : VR-Default
  XIQ FQDN CLI  :
  XIQ DHCP IP   :
  XIQ DHCP FQDN : test.com
  Redirector    :
-----------------------------------------------------------------------------
Virtual-Router  : VR-Mgmt
  XIQ FQDN CLI  : 10.16.231.95
  XIQ DHCP IP   : 1.2.3.4
  XIQ DHCP FQDN : test2.com
  Redirector    :
-----------------------------------------------------------------------------

The following example shows information about IQ Agent with a configured HTTP proxy (line 14):

# show iqagent
----------------------------------  --------------------------------------------
State                               Enabled
Active VR                           VR-Mgmt
Detected VR                         VR-Mgmt
XIQ Address                         10.51.3.175
Serial Number                       1546N-40030
----------------------------------  --------------------------------------------
Status                              CONNECTED TO XIQ
Version                             0.4.5
Last Onboard Time                   15:05:38 11 12 2020 UTC
Debug                               ON
Source Interface                    DEFAULT
HTTP Proxy                          iqagent@10.51.3.163:3128
----------------------------------  --------------------------------------------
Association Method                  CLI
Association Url                     https://10.51.3.175/hac-webapp/rest/v1/association
Poll URL                            https://10.51.3.175/hac-webapp/rest/v1/poll/1546N-40030
----------------------------------  --------------------------------------------
Last Health Status                  SUCCESS
Last Health Success Time            15:05:41 11 12 2020 UTC
----------------------------------  --------------------------------------------
Last Poll Status                    SUCCESS
Last Poll Success Time              15:05:38 11 12 2020 UTC
----------------------------------  --------------------------------------------
Last Monitor Status                 SUCCESS
Last Monitor Success Time           15:05:48 11 12 2020 UTC
----------------------------------  --------------------------------------------

History

This command was first available in ExtremeXOS 30.7.

IQ Agent status was added in ExtremeXOS 31.1.

HTTP proxy support was added in ExtremeXOS 31.3.

Platform Availability

This command is available on ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, 5420, and 5520 series switches.