configure ip nat rule monitor

configure ip nat rule rule_name monitor [on | off]

Description

Enables or disables statistics monitoring (byte/packet counters) on a Network Address Translation (NAT) rule in the outward direction and counts Tx counters.

Syntax Description

ip Specifies Internet Protocol (IP).
nat Specifies NAT.
rule Specifies a NAT rule.
rule_name Specifies the name of the NAT rule to enable monitoring.
monitor Specifies enabling monitoring.
on Enables monitoring.
off Disables monitoring.

Default

N/A.

Usage Guidelines

This command enables/disables statistics monitoring (byte/packet counters) on a NAT rule in the outward direction and counts Tx counters only. There is no provision for Rx counters.

Example

The following example enables monitoring on the NAT rule "rule1":

# configure ip nat rule rule1 monitor on

The following example disables monitoring on the NAT rule "rule1":

# configure ip nat rule rule1 monitor off

History

This command was first available in ExtremeXOS 31.2.

Platform Availability

This command is available on the switches that support the IP NAT feature. For information about which switches support this and other features, see the ExtremeXOS 31.5 Feature License Requirements document.