enable network-clock gptp ports

enable network-clock gptp ports [port_list {only} | all]

Description

Enables gPTP on one or more ports.

Syntax Description


`port_list`	Specifies one or more of the switch‘s physical ports.
only	Apply change only to specified port, even if port is master of a load sharing group.
all	Specifies all of the switch‘s physical ports.

Default

Disabled.

Usage Guidelines

Use this command to configure on which ports gPTP runs. gPTP does not run on any ports if it is not first enabled in the switch by the enable network-clock gptp command.

Example

# enable network-clock gptp ports 4

History

This command was first available in ExtremeXOS 15.3.

Platform Availability

This command is available on ExtremeSwitching X450-G2, X460-G2, X670-G2, 5520 switches if the AVB feature pack license is installed on the switch..