CLI File Name Completion
When entering a command, at the point where a file name could be
entered, press [Tab] or ? to display an alphabetically sorted list of
possible file names. You can also type part of the file name to display a filtered list of
file names matching what you have typed so far.
The following commands support this behavior:
- cd directory_name
- configure access-list aclname [any | ports port_list | vlan vlan_name] {ingress | egress}
- configure ip-security dhcp-bindings storage filename name
- configure snmp access-profile [ access_profile {readonly | readwrite} | [[add rule ] [first | [[before | after] previous_rule]]] | delete rule | none ]
- configure ssh2 access-profile [ access_profile | [[add
rule] [first | [[before | after] previous_rule]]] | delete
rule | none]
- configure telnet access-profile [ access_profile | [[add rule ] [first | [[before | after] previous_rule]]] | delete rule | none ]
- configure vlan vlan_name udp-profile [profilename | none]
- cp old_name
new_name
- create process name executable exe {start [auto | on-demand]} {node
node} {vr
vr-name} {description
description} {arg1 {arg2 { arg3 { arg4 {
arg5 { arg6 { arg7 { arg8 { arg9
}}}}}}}}}
- create process name
python-module
python-module {start [auto | on-demand]} {node
node} {vr
vr-name} {description
description} {arg1 {arg2 {arg3 {arg4 {arg5 {arg6 {arg7 {arg8 {arg9}}}}}}}}}
- edit policy filename
- enable license file filename
- enable ssh2 {access-profile [access_profile | none]} {port tcp_port_number} {vr [vr_name | all | default]}
- load script filename {arg1} {arg2} ... {arg9}
- ls file_name
- mkdir directory_name
- mv old_name
new_name
- scp2 {cipher
cipher} {mac
mac} {compression [on | off]} {port
portnum} {vr
vr_name} user [hostname | ipaddress]:remote_file
local_file
- show ssl {[trusted-ca | ocsp-signature-ca] [file_name | all]} {manufacturing}{certificate | detail}
- tftp [ ip-address | host-name ] { -v
vr_name } { -b
block_size } [ -g | -p ] [ -l
local-file { -r
remote-file } | -r
remote-file { -l
local-file } ]
- tftp get [ ip-address | host-name] { vr
vr_name } { block-size
block_size } remote-file
local-file} {force-overwrite}
- tftp put [ ip-address | host-name] {vr
vr_name} {block-size
block_size}local-file { remote-file}
- rm file_name
- rmdir directory_name
- run script filename {arg1} {arg2} ... {arg9}
- unconfigure ssl certificate
[trusted-ca | ocsp-signature-ca] [file_name |
all ]
