show mld group

show mld group {{vlan} {name} | {v6grpipaddress}} {MLDv2}

Description

Lists the MLD group membership for the specified VLAN or group.

Syntax Description


`name`	Specifies a VLAN name.
`v6grpipaddress`	Specifies a group IPv6 address.
MLDv2	DisplayS the MLD group in MLDv2 format (if group record is MLDv2 compatible, otherwise displayS in earlier format). This option is not supported in this release.

Default

MLDv1.

Usage Guidelines

If no VLAN is specified, all VLANs are displayed. You can also filter the display by group address or by multicast stream sender address.

Example

The following command lists the MLD group membership for the VLAN accounting:

show mld group vtest3

Output from this command looks similar to the following:

Group Address               Ver Vlan            Port   Age
ff03::1:1                   1   vtest3          4:5    25
ff03::1:2                   1   vtest3          4:5    25
ff02::1:ff22:124            1   vtest3          4:45   26
ff05::a:abcd                1   vtest3          4:15   23
ff05::a:abce                1   vtest3          4:15   23
ff02::1:ff22:112            1   vtest3          4:45   26
ff02::1:ff1f:a418           1   vtest3          4:45   26

History

This command was first available in ExtremeXOS 11.2.

Platform Availability

This command is available on the platforms listed for the IPv6 multicast routing feature in the ExtremeXOS 31.5 Feature License Requirements document.