copy FILE1 FILE2

Copies a flash or USB file to a remote server and vice versa.

Syntax

copy FLASH-FILE FLASH-FILE

copy FLASH-FILE USB-FILE

copy FLASH-FILE REMOTE-FILE

copy USB-FILE FLASH-FILE

copy USB-FILE USB-FILE

copy USB-FILE REMOTE-FILE

copy REMOTE-FILE FLASH-FILE

copy REMOTE-FILE USB-FILE

FLASH-FILE: Specifies the flash file path in format flash://flash-type/file-name.
REMOTE-FILE: Specifies the remote server file path in format scp://username:password@host[:port]/filepath.; Domain name, IPv4 address, and IPv6 address are supported as host. Only valid unicast IP addresses are supported. Multicast IP addresses are not supported.
USB-FILE: Specifies the USB file path in format usb://file-name.

Exec mode

This command is available only to users with the admin role.

Valid user credentials must be provided for accessing the remote server.

Input file path must be valid.

Target destination must be reachable.

Copying a file from one remote server to another remote server is not supported.

The following example copies a file from the USB to a remote location.

device# copy usb://testfile   scp://testuser:testpassword@1.1.1.1:22/home/testuser/test123