snmp-server user

Configures the SNMP v3 user for authenticating.

Syntax

snmp-server { user [ user name ] auth [ noauth | md5 | sha ] auth-key [ auth-key ] priv [ nopriv | aes | des ] priv-key [ priv-key ] }

Parameters

user user name
Specifies the SNMPv3 user name. Valid length is 1 to 32 characters.
auth [ noauth | md5 | sha ]
Specifies the supported authentication method.
auth-key auth-key
Specifies the key phrase to be used for authentication. The auth-key string can contain only alpha-numeric characters. Valid string length is 8 to 40 characters.
priv [ nopriv | aes | des ]
Specifies the supported encryption method.
priv-key [ priv-key]
Specifies the key phrase to be used for encryption. Valid priv-key length is 8 to 40 characters.

Modes

Config mode

Usage Guidelines

This command is available only to users with the admin role.

Examples

The following example configures an SNMP server user.

device(config)# snmp-server user user8 auth sha auth-key authKey1 priv aes priv-key user1privkey 
 
device(config)# snmp-server user user2 auth md5 auth-key authkey12 priv nopriv 

device(config)# snmp-server user user3 auth noauth