show counters egress

Displays egress counters information for the specified egress.

Syntax

show counters egress name

Parameters

name
Specifies the name of the egress for counter show. The egress name supports 1 through 32 characters. Characters allowed are alpha-numeric, underscore, and dot. Underscore is not allowed as the first character.

Modes

Exec mode

Usage Guidelines

Valid egress-name must be provided.

The clear counters egress command can be used to clear egress counters.

Examples

The following example shows egress statistics for egr1.

device# show counters egress egr1 
Egress-group Packet Statistics  
   TX Frames : 10 
    TX Bytes : 1430

The following example shows egress statistics for all egresses.

device# show counters egress all
Egress Packet Statistics : ep_eg01_01
   TX Frames : 250000000 
    TX Bytes : 130000000000

Egress Packet Statistics : ep_eg01_02
   TX Frames : 250000000 
    TX Bytes : 130000000000