show link-fault-signaling

Displays link-fault-signaling information.

Syntax

show link-fault-signaling

Modes

Exec mode

Usage Guidelines

This command is available only to users with the admin role.

This command is not allowed on management interface.

Examples

The following example shows how to configure link-fault-signaling on a device.

device(config)# int e 1/1-16,2/1-16 

device(config-if-eth-1/1-16,2/1-16)# no link-fault-signaling  

devicedevice(config-if-eth-1/1-16,2/1-16)# 

The following example shows link-fault-signaling information.

device# show link-fault-signaling 
Port       Link-Fault 
========== =============== 
Eth 1/1    OFF 
Eth 1/2    ON 
Eth 1/3    ON 
Eth 1/4    ON 
Eth 1/5    ON 
Eth 1/6    ON 
Eth 1/7    ON