copy FILE

Copies contents of a configuration file from the specified location to the running configuration.

Syntax

copy FLASH-FILE running-config

copy REMOTE-FILE running config

copy USB-FILE running-config

Parameters

running-config: Specifies the current running configuration.
FLASH-FILE: Specifies the flash file path in format flash://flash-type/file-name.
REMOTE-FILE: Specifies the remote server file path in format scp://username:password@host[:port]/filepath.; Domain name, IPv4 address, and IPv6 address are supported as host. Only valid unicast IP addresses are supported. Multicast IP addresses are not supported.
USB-FILE: Specifies the USB file path in format usb://file-name.

Modes

Exec mode

Usage Guidelines

This command is available only to users with the admin role.

Valid user credentials must be provided for accessing the remote server.

Input config file path must be valid.

Examples

The following examples are some valid copy commands.

device# copy flash://config-file/testfile running-config 

device# scp://test:test@1.1.1.1:22/home/test/config-file/testfile running-config

device# copy usb://testfile running-config