Displaying VRRPv3 statistics

Before displaying statistics, VRRPv3 must be configured and enabled in your network to generate traffic.

Use one or more of the following commands to display VRRPv3 information. The commands do not have to be entered in this order.

Use the exit command to return to privileged EXEC mode, if required.

Enter the show ipv6 vrrp summary command.

device# show ipv6 vrrp summary

Total number of VRRP session(s)   : 2
Master session count  : 1
Backup session count  : 1
Init session count    : 0

VRID  Session  Interface  Admin    Current   State   Short-path  Revert    SPF
                          State    Priority          Forwarding  Priority  Reverted
====  =======  =========  =====    ========  =====   ==========  ========  ========
18    VRRPE    Ve 2018    Enabled  254       Master  Enabled     unset     No      
19    VRRPE    Ve 2019    Enabled  100       Backup  Enabled     unset     No

This example shows summary output for the two IPv6 VRRP-E sessions that are configured for virtual routers 18 and 19.

To display detailed information for a single VRRP virtual router ID(VRID), enter the show ipv6 vrrp command with the detail keyword and a specific VRID.

device# show ipv6 vrrp 19 detail

Total number of VRRP session(s)   : 1

VRID 19
  Interface: Ve 2019;  Ifindex: 1207961571
  Mode: VRRPE
  Admin Status: Enabled
  Description :
  Address family: IPv6
  Version: 3
  Authentication type: No Authentication
  State: Backup
  Session Master IP Address: fe80::205:33ff:fe79:fb1e
  Virtual IP(s): 2001:2019:8192::1
  Virtual MAC Address: 02e0.5200.2513
  Configured Priority: unset (default: 100); Current Priority: 100
  Advertisement interval: 1 sec  (default: 1 sec)
  Preempt mode: DISABLE  (default: DISABLED)
  Advertise-backup: ENABLE  (default: DISABLED)
  Backup Advertisement interval: 60 sec  (default: 60 sec)
  Short-path-forwarding: Enabled
  Revert-Priority: unset; SPF Reverted: No
  Hold time: 0 sec  (default: 0 sec)
  Master Down interval: 4 sec
  Trackport:
    Port(s)                    Priority  Port Status
    =======                    ========  ===========

  Global Statistics:
  ==================
    Checksum Error : 0
    Version Error  : 0
    VRID Invalid   : 0

  Session Statistics:
  ===================
    Advertisements             : Rx: 103259, Tx: 1721
    Neighbor Advertisements             : Tx: 0
    Session becoming master    : 0
    Advts with wrong interval  : 0
    Prio Zero pkts             : Rx: 0, Tx: 0
    Invalid Pkts Rvcd          : 0
    Bad Virtual-IP Pkts        : 0
    Invalid Authenticaton type : 0
    Invalid TTL Value          : 0
    Invalid Packet Length      : 0
    VRRPE backup advt sent     : 1721
    VRRPE backup advt recvd    : 0

This example shows detailed output for the IPv6 VRRP-E session for virtual router 19.