The 2000 W AC PSU-FB (model XN-ACPWR-2000W-FB with front-to-back ventilation airflow) is compatible with all 5720 Series switch models.
Note
In order to obtain 2000W output from this power supply, the PSU must be connected to a 200-240VAC source.
The ExtremeSwitching 2000 W AC power supply has a keyed power inlet (C16) that requires a notched (C15) power cord.
Note
The 2000W power supply unit with System Number 801098 has multiple hardware revisions that are indicated by the final two characters. Revisions 801098-00-AA and 801098-00-AB are not compatible with the 5720 Series. Those revisions are only compatible with the 5520 Series and VSP 4900 Series. To use the 2000W power supply with the 5720 Series, the revision must be 801098-AC or later.The ExtremeSwitching 2000 W AC power supply has the status LEDs listed in the following table:
|
IN_OK (Green) |
OUT_OK (Green or Red) |
Description |
|---|---|---|
|
Off |
Off |
No AC input power connection or low AC voltage. |
|
On |
Off |
AC input good, 54V output disabled. |
|
On |
(Red) On |
AC input good, output (54V) fault. |
|
On |
(Green) On |
AC input good. |