The front panel of every 5720 Series switch provides one slot to install the following:
5720-VIM-2CE versatile interface module that provides two 100GbE QSFP28 MACsec capable ports. 10/25/40Gb data rates supported through port partitioning.
5720-VIM-6YE versatile interface module that provides six 1/10/25GbE SFP28 MACsec capable ports.
The 5720-VIM-2CE ports are 1-2 on the 5720-VIM-2CE faceplate.
The 5720-VIM-6YE ports are 1-6 on the 5720-VIM-6YE faceplate.
In Fabric Engine, the 5720-VIM slot number is 2.
5720-VIMs are ordered separately. Each VIM label can be found on the bottom side of the device, as seen in the following figure:
|
5720-VIM-2CE |
5720-VIM-6YE |
|
|---|---|---|
|
Usable ports |
2 |
6 |
|
Operational speeds |
10/25/40/100Gbps |
1/10/25Gbps |
|
PHY present |
Yes |
Yes |
|
1000BASE-T & 10GBASE-T |
10GBASE-T only |
Both |
|
Mixed speeds |
10/25/40Gbps | 1/10/25Gbps |
|
1G Auto-negotiation |
Not supported |
Not supported |
|
10G Auto-negotiation |
Not supported |
Not supported |
|
25G Auto-negotiation |
||
|
FEC |
Supported CL74/CL91 |
Supported CL74/CL91 |
|
MACsec |
128/256bit |
128/256bit |