Secure the Access Point after Installation

Details about installing a security cable on the access point after installation.

Before you begin

The following hardware must be supplied by the user for safety cable installation:
  • A 3 mm diameter security cable
  • Lock to secure the ends of the security cable

About this task

You can secure the access point to the mounting environment using a 3 mm diameter safety cable. The safety cable is used to enhance the physical security of the access point after installation.

Procedure

  1. Insert the safety cable through the security cable hole on the metal base of the access point.
    Click to expand in new window
    Security cable hole on the access point
    Image of the security cable hole located to the left of the vent and the ground screw.
    Callout Description
    1 Security cable hole
  2. Push the cable through the security hole until you see it come out on the other side of the metal base.
  3. Insert a lock through the looped ends of the cable and lock it in place.
9036165-04 Rev AB