Install the Access Point on a Wall

Before you begin

The access point is used with the KT-147407-02 bracket parts for wall installation. The KT-150173-01 extension arm may also be used with the access point and the KT-147407-02 bracket parts for wall and flat surface installation.

Other wall install options include using the:

MBO-ART03 bracket
Note
You can use the MBO-ART02 bracket if you have one.
The MBO-ART02 wall mount bracket is End of Sale (EOS) as of January, 2023. It is replaced by the MBO-ART03 bracket.

The following hardware is required when installing the access point on a flat surface using the KT-147407-02 bracket:

One access point
Flat part of the KT-147407-02 bracket with two holes on the metal surface (see Flat part of the KT-147407-02 bracket).
1-axis tilt bracket (see 1-axis tilt bracket).
KT-150173-01 extension arm (see KT-150173-01 extension arm).
Six M6 screws
Four M6 size hex-head screws
Screw-in anchors if the access point is being mounted on a wood wall or a concrete surface.

Note

The M6 hex-head screws and screw-in anchors must be provided by the installer.

If you install the access point to the wall using the ART03 bracket, use the following hardware:

One access point
MBO-ART03 articulating mounting bracket
Six M6 hex-head screws
- Two M6 hex-head screws to attach the bracket to the access point
- Four M6 hex-head screws to attach the bracket to the wall or a flat surface.

Note

The cable glands must face down when you install the access point on a wall.