Dimensions: 11.3 in. x 10 in. x
2.9 in. (288 mm x 254 mm x 75 mm)
LEDs: Two top-mounted LEDs – all
LEDs will be on during reset
One security hanger hole
Power: PoE 802.3at
Antenna:
Eight WiFi internal
antennas
One BLE internal
antenna
Temperature:
Operating temperature:
-40°F to +131°F (-40°C to +55°C)
Storage temperature:
-40°F to +158°F (-40°C to +70°C)
Enclosure: Top radome is plastic
and bottom is metal
AP560i side ports
Callout
Description
1
GE1 port
2
GE2 port
3
Console port
Note
The console port cap must be tightened to a
torque of 5 in-lbs.
If a torque wrench is not available, a flat-bladed screwdriver
can be used. The flat blade must be 7/16 in. wide to avoid noticeable cap slot
deformation.
Note
The slot
deformation will not affect the IP67 console port cap
properties.
Turn the console port cap until there is resistance
from the access point gasket, and then turn the console port cap to a minimum of
½ turn further.
