Create Static ARP Entries

Use the following procedure to create a static ARP entry.

Before you begin

To perform this procedure on a non-default VRF, you must first change the VRF instance. For information about how to use EDM for a non-default VRF, see Select and Launch a VRF Context View. All parameters might not be available in non-default VRFs.

About this task

Note

Note

Static multicast ARP entries are not supported for NLB Unicast or NLB Multicast operations.

Procedure

  1. In the navigation pane, expand Configuration > IP.
  2. Select IP.
  3. Select the ARP tab.
  4. Select Insert.
  5. In NetAddress, type the IP address.
  6. Select Port or Port in VLAN.
  7. In the dialog box, select the interface.
  8. Select OK.
  9. In PhysAddress, type the MAC address.
  10. Select Insert.
9037374-00 Rev AB