Display Virtual Service Configuration

About this task

Perform this procedure to display the virtual service configuration on the switch.

1. To enter User EXEC mode, log on to the switch.
2. Display the virtual-service configuration:

   show virtual-service config [WORD<1-128>]

Example

Display the configuration of all virtual services:

Switch:1>show virtual-service config 
====================================================================================================
                               Installed Packages
====================================================================================================
    Package:             FIGW-SHAPE
    Package App Name:    FabricIPSecGW_VM_5.0.0.0_20.04
    Package Version:     5.0.0.0
    Package Name:        FabricIPSecGW_VM_5.0.0.0_20.04.ova

====================================================================================================

                            Virtual Services Config
====================================================================================================

Virtual Service :FIGW-SHAPE
  Memory Assigned(M) : 8196
  Number of Cores    : 6
  Additional Disk Assigned:

  VPort Information:
  Name                   Vlan            Connect Type    Insight Port    NIC Type
  eth0                                   vtd             1/s1

Management Status :              Enabled
-----------------------------------------------------------------------------------------------------------