Viewing BGP aggregate information

Display information about current aggregate addresses.

Procedure

To enter User EXEC mode, log on to the switch.
Display information about current aggregates:

show ip bgp aggregates [<prefix/len>] [vrf WORD <1–16>] [vrfids WORD<0-255>]

The following table defines parameters for the show ip bgp aggregates command.


Variable	Value
<prefix/len>	Specifies the IP address and the mask length.
vrf WORD<1–16>	Specifies a VRF instance by name.
vrfids WORD<0–255>	Specifies a range of VRFs by ID number.