Associating an Extreme Integrated Application Hosting Port to a VRF Instance

Note

Note

This procedure only applies to 5720 Series.

About this task

Perform this procedure to associate an Extreme Integrated Application Hosting (IAH) port to a Virtual Router Forwarding (VRF) instance.

Note

Note

You can associate a VRF instance to an IAH port after you configure the VRF. By default, the IAH ports are associated to the GlobalRouter.

Procedure

  1. In the navigation pane, expand the following folders: Configuration > Edit > Insight Port.
  2. Select the IAH port you want to configure.
  3. Select the VRF tab.
  4. Optional: In the VrfNames field, select the ShowAll button to view the VRF instances the IAH Port is associated with.
  5. In the BrouterVrfId field, select the ellipsis (...) button, and select the required VRF instance(s).
  6. Select Ok.
  7. Select Apply.

VRF Field Descriptions

Use data in the following table to use the VRF tab.

Name

Description

VrfIds

Shows the VRF ID.

VrfNames

Shows the VRF name.

VrfCount

Shows the number of VRFs to which the Extreme Integrated Application Hosting (IAH) port is associated with.

BrouterVrfId

Specifies the VRF ID for a brouter port.

BrouterVrfName

Shows the VRF name for a brouter port.