Configure SSID and Wireless

Before you begin

Service Set Identifier (SSID) configuration in ExtremeCloud IQ depends on the type of authentication (802.1X or MAC) and the type of RadSec deployed.

ExtremeCloud IQ supports the following configurations:
  • Enterprise 802.1X Authentication with Universal ZTNA RadSec
  • Enterprise 802.1X AutheExtremeCloud IQntication with Universal ZTNA RadSec Proxy
  • Enterprise MAC Authentication with Universal ZTNA RadSec
  • Open MAC Authentication with Universal ZTNA RadSec Proxy
Note

Note

Universal ZTNA RADSEC and ExtremeCloud IQ cloud authentication services cannot co-exist. If any cloud authentication objects are in the virtual IQ, you must use the RADSEC Proxy.

About this task

Use this procedure to configure SSID and wireless.

Procedure

  1. Select Plus sign to create a new SSID.
  2. In the Wireless Network section, Name (SSID) field, enter the SSID name.
  3. In the Broadcast Name field, enter the broadcast name.
  4. Configure SSID usage as follows:
    1. For Enterprise access, select SSID Usage > SSID AUTHENTICATION > Enterprise WPA / WPA2 / WPA3.
    2. For Open access (MAC with RadSec Proxy Only), select SSID Usage > SSID AUTHENTICATION > Open.
  5. (Optional) Enable MAC authentication as follows:
    1. In SSID Usage select MAC AUTHENTICATION.
    2. Select the MAC AUTHENTICATION slider and toggle it ON.
  6. Configure SSID authentication settings as follows:
    1. For Universal ZTNA RadSec, in the Authentication Settings section, select the Authentication with ExtremeCloud Universal ZTNA slider and toggle it ON.
    2. For Enterprise 802.1X with Universal ZTNA RadSec Proxy, to add a Default RADIUS Server Group, select Authentication Settings > Authenticate via RADIUS Server > Plus Icon.
    3. For Open MAC with Universal ZTNA RadSec Proxy, to add a Default RADIUS Server Group, select SSID Usage > MAC AUTHENTICATION > Authenticate via RADIUS Server > Plus Icon.
  7. From the Configure RADIUS Server screen, configure a RADIUS server as follows:
    1. In the RADIUS Server Group Name field, enter the group name for a RADIUS server.
    2. Add or select an existing external RADIUS Server.
    3. Select Save RADIUS.