Create Network Policies

About this task

This task shows you how to create a network policy.

Procedure

  1. Select Create Policy.
  2. Select Add Network Policy
    Create New Policy pop-up window displays.
  3. For Policy Name, enter at least three alphanumeric characters
  4. (Optional) Enter a description.
  5. For User Groups, select Any User or select a user group from the drop-down menu or create one.
  6. For Device Groups, select Any Device or select a device group from the drop-down menu or create one.
    Note

    Note

    If user and device groups are configured in the policy, for the policy to match for network access both access conditions must pass.
  7. (Optional) For Location Based Condition, select a location condition from the drop-down menu or create a new condition to use.
  8. (Optional) For Time Based Condition, select a time condition from the drop-down menu or create a new condition to use.
  9. (Optional) For Authentication Based Condition, select an authentication condition from the drop-down menu or create a new condition.
  10. If you do not want to use a secure network access, change the Default Network Access to Allow.
  11. For the Select VLAN from ExtremeCloud IQ options, you can use your own VLAN or a VLAN from ExtremeCloud IQ.
    1. To use your own VLAN, ensure Select VLAN from ExtremeCloud IQ is deactivated (default) and enter a VLAN ID.
    2. To use a VLAN from ExtremeCloud IQ, activate Select VLAN from ExtremeCloud IQ and select a VLAN from the list.
  12. (Optional) Select a VLAN from the drop-down menu.
  13. (Optional) ISID - this is a fabric service identifier.
  14. (Optional) Select Network Service Group and continue as follows:
    1. Select Add Network Service Group.
    2. Select Allowed or Denied.
  15. Select Add.

Results

Your network policy displays in the list showing the Network Access status as Enabled.