Configure an MPLS QoS EXP-to-Traffic Class Mutation Map

Follow these steps to configure an MPLS QoS EXP-to-traffic class mutation map. This configuration is not supported on SLX 9150 devices.

1. Enter global configuration mode.
   

   device# configure terminal
   

2. Create and name an MPLS QoS EXP-to-traffic class mutation map.
   

   device(config)# qos-mpls map exp-traffic-class expTcMap
   

3. Define the EXP-to-traffic class values.
   

   device(exp-traffic-class-expTcMap)# exp 0 to traffic-class 7 drop-precedence 0
   device(exp-traffic-class-expTcMap)# exp 1 to traffic-class 7 drop-precedence 1
   device(exp-traffic-class-expTcMap)# exp 4 to traffic-class 7 drop-precedence 0
   device(exp-traffic-class-expTcMap)# exp 5 to traffic-class 7 drop-precedence 1
   device(exp-traffic-class-expTcMap)# exp 6 to traffic-class 7 drop-precedence 2
   device(exp-traffic-class-expTcMap)# exp 7 to traffic-class 7 drop-precedence 3
   

   You can enter eight mappings corresponding to EXP values of 0 to 7.
4. Return to privileged EXEC mode.
   

   device(exp-traffic-class-expTcMap)# end
   

5. Verify the configuration.
   

   device# show qos-mpls maps exp-traffic-class 
   exp-traffic-class map 'expTcMap'
       Exp   :    0  1  2  3  4  5  6  7
      ------- ------------------------
   Traffic-class: 5  5  4  6  5  5  5  5
   Drop-Preced  : 0  1  1  1  0  2  2  1
   
      Enabled on the following slots:
   

6. Save the running-config file to the startup-config file.
   

   device# copy running-config startup-config
   

Example

This example summarizes the commands in this procedure.

device# configure terminal
device(config)# qos-mpls map exp-traffic-class expTcMap
device(exp-traffic-class-expTcMap)# exp 0 to traffic-class 7 drop-precedence 0
device(exp-traffic-class-expTcMap)# exp 1 to traffic-class 7 drop-precedence 1
device(exp-traffic-class-expTcMap)# exp 4 to traffic-class 7 drop-precedence 0
device(exp-traffic-class-expTcMap)# exp 5 to traffic-class 7 drop-precedence 1
device(exp-traffic-class-expTcMap)# exp 6 to traffic-class 7 drop-precedence 2
device(exp-traffic-class-expTcMap)# exp 7 to traffic-class 7 drop-precedence 3
device(exp-traffic-class-expTcMap)# end
device# show qos-mpls maps exp-traffic-class
device# copy running-config startup-config