Configuring strict priority egress scheduling

Follow these steps to configure strict priority scheduling.

1. Enter global configuration mode.
   

   device# configure terminal
   

2. Select the policy map.
   

   device(config)# policy-map policy_1
   

3. Select the classification.
   

   device(config-policymap)# class default
   

4. Specify the scheduling attributes.
   

   device(config-policymap-class)# scheduler strict-priority 3 dwrr 10 10 10 10 60 TC535000 TC6 36000 TC7 37000  
   

5. Return to privileged EXEC mode.
   

   device(config-policymap-class)# end
   

6. Verify the configuration.
   

   device# show running-config | include strict-priority
     scheduler strict-priority 3 dwrr 10 10 10 10 60 TC5 40000 TC6 41000 TC7 42000
   

7. Enter global configuration mode.
   

   device# configure terminal
   

8. Enter interface configuration mode.
   

   device(config)# interface ethernet 0/1
   

9. Bind the policy to the port.
   

   device(conf-if-e-0/1)# service-policy out policy_1
   

10. Return to privileged EXEC mode.
    

    device(conf-if-e-0/1)# end
    

11. Save the running-config file to the startup-config file.
    

    device# copy running-config startup-config
    

Strict priority scheduling configuration example

device# configure terminal
device(config)# policy-map policy_1
device(config-policymap)# class default
device(config-policymap-class)# scheduler strict-priority 3 dwrr 10 10 10 10 60 TC535000 TC6 36000 TC7 37000  
device(config-policymap-class)# end
device# show running-config | include strict-priority
device(config)# interface ethernet 0/1
device(conf-if-e-0/1)# service-policy out policy_1
device(conf-if-e-0/1)# end
device# copy running-config startup-config