FSS Messages

FSS-1001

Message: Component (<component name>) dropping HA data update (<update ID>).

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates that an application has dropped a high availability (HA) data update.

Recommended Action: Execute the copy support command and contact your switch service provider.

FSS-1002

Message:Component (<component name>) sending too many concurrent HA data update transactions (<dropped update transaction ID>).

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates that an application has sent too many concurrent high availability (HA) data updates.

Recommended Action: Execute the copy support command and contact your switch service provider.

FSS-1003

Message: Component (<component name>) misused the update transaction (<transaction ID>) without marking the transaction beginning.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates that the fabric synchronization service (FSS) has dropped the update because an application has not set the transaction flag correctly.

Recommended Action: Execute the copy support command and contact your switch service provider.

FSS-1004

Message: FSS out of memory (<memory allocation with number of bytes>).

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the system ran out of memory.

Recommended Action: Check memory usage on the switch using the show process memory command.

Execute the copy support command and contact your switch service provider.

FSS-1005

Message: FSS read failure.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates that the read system call to the fabric synchronization service (FSS) device has failed.

Recommended Action: If the message persists, execute the copy support command and contact your switch service provider.

FSS-1006

Message: No FSS message available.

Message Type: LOG

Severity: WARNING

Probable Cause: Probable Cause Indicates that data is not available on the fabric synchronization service (FSS) device.

Recommended Action: If the message persists, execute the copy support command and contact your switch service provider.

FSS-1007

Message: <component name>: Faulty Ethernet connection.

Message Type: LOG | FFDC

Severity: CRITICAL

Probable Cause: Indicates that the Ethernet connection between the active and standby management modules is not healthy. The error occurs when the standby management module does not respond to a request from the active management module within 5 seconds. This usually indicates a problem with the internal Ethernet connection and a disruption of the synchronization process.

Recommended Action: Execute the copy support command and contact your switch service provider.

FSS-1008

Message: FSS Error on service component [<service name><service instance>:<component name>]: <Error Message>.

Message Type: LOG

Severity: CRITICAL

Probable Cause: Indicates that a fabric synchronization service (FSS) error has occurred.

Recommended Action: Execute the copy support command and contact your switch service provider.

FSS-1009

Message: FSS Error on service instance [<service name><service instance>]: <Error Message>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that a fabric synchronization service (FSS) error has occurred.

Recommended Action: Execute the copy support command and contact your switch service provider.

FSS-1010

Message: FSS Warning: <%s>.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates that a fabric synchronization service (FSS) error may have occurred.

Recommended Action: No action is required.

FSS-1011

Message: All services complete the critical recoveries in <time taken for the critical service recovery> sec.

Message Type: LOG

Severity: INFO

Probable Cause: Indicates a non-disruptive with warm recovery.

Recommended Action: If the time taken for critical service recovery is more than 8 seconds, contact your switch service provider.

FSS-1012

Message: FSS transport flow hitting the threhold (<number of waiting requests>:<the current xmb allocation size>:<total of KERNEL memory>:<total of ATOMIC memory>).

Message Type: LOG | FFDC

Severity: CRITICAL

Probable Cause: Indicates that the underlying transport is not healthy.

Recommended Action: Execute the copy support command and contact your switch service provider.

FSS-1013

Message: FSS transport flow hitting OOM (<the current xmb allocation size>).

Message Type: LOG | FFDC

Severity: CRITICAL

Probable Cause: Indicates out of memory.

Recommended Action: Execute the copy support command and contact your switch service provider.

FSS-1014

Message: FSS transport is being blocked for too long (<the current xmb allocation size>).

Message Type: LOG | FFDC

Severity: CRITICAL

Probable Cause: Indicates that fabric synchronization service (FSS) transport has been blocked for too long time.

Recommended Action: Execute the copy support command and contact your switch service provider.