MAPS Messages

MAPS-1001

Message:<object>, Condition=<condition>, Current Value:<ms, values, units>, RuleName=<Rule name>, Dashboard Category=<Dashboard Category>.

Message Type: LOG

Severity: CRITICAL

Probable Cause: Indicates that the specified rule has been triggered because the errors are above the configured threshold.

Recommended Action: No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation.

MAPS-1002

Message: <object>, Condition=<condition>, Current Value:<ms, values, units>, RuleName=<Rule name>, Dashboard Category=<Dashboard Category>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the specified rule has been triggered because the errors are above the configured threshold.

Recommended Action: No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation.

MAPS-1003

Message: <object>, Condition=<condition>, Current Value:<ms, values, units>, RuleName=<Rule name>, Dashboard Category=<Dashboard Category>.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates that the specified rule has been triggered because the errors are above the configured threshold.

Recommended Action: No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation.

MAPS-1004

Message: <object>, Condition=<condition>, Current Value:<ms, values, units>, RuleName=<Rule name>, Dashboard Category=<Dashboard Category>.

Message Type: LOG

Severity: INFO

Probable Cause: Indicates that the specified rule has been triggered because the errors are above the configured threshold.

Recommended Action: No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation.

MAPS-1010

Message: Port(s) fenced due to RuleName=<Rule name>, Condition=<condition>, Obj:<object> <ms, values, units>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the specified rule has been triggered because the errors are above the configured threshold, and therefore the specified ports are fenced.

Recommended Action: Respond to this message as is appropriate to the particular policy of the end-user installation.

MAPS-1011

Message: Port(s) decommissioned due to RuleName=<Rule name>, Condition=<condition>, Obj:<object> <ms, values, units>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the specified rule has been triggered because the errors are above the configured threshold, and therefore the specified ports are fenced.

Recommended Action: Respond to this message as is appropriate to the particular policy of the end-user installation.

MAPS-1012

Message: Port decommission action failed on port <object>, with reason string, <reason>

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the port decommission has failed on an object.

Recommended Action: Respond to this message as is appropriate to the particular policy of the end-user installation.

MAPS-1020

Message: Switch wide status has changed from <Previous state> to <Current state>.

Message Type: LOG | AUDIT

Class: MAPS

Severity: WARNING

Probable Cause: Indicates that the switch is not in a healthy state. This occurred because of a rule violation.

Recommended Action: Check the accompanying RASLog messages to determine the cause of the state change.

MAPS-1021

Message: RuleName=<Rule name>, Condition=<condition>, Obj:<object, units> <Old state> has contributed to switch status <New state>.

Message Type: LOG | AUDIT

Class: MAPS

Severity: WARNING

Probable Cause: Indicates that the switch status has changed to a healthy state. This occurred because none of the factors are violated.

Recommended Action: No action is required.

MAPS-1100

Message: Rule <Rule name> is created.

Message Type: LOG | AUDIT

Class: MAPS

Severity: INFO

Probable Cause: Indicates that the specified rule was created in the system.

Recommended Action: Make sure the configuration change is expected.

MAPS-1101

Message: Rule <Rule name> is deleted.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified rule was deleted from the system.

Recommended Action: Make sure the configuration change is expected.

MAPS-1102

Message: Rule <Rule name> is modified.

Message Type: LOG | AUDIT

Class: MAPS

Severity: INFO

Probable Cause: Indicates that the specified rule was modified in the system.

Recommended Action: Make sure the configuration change is expected.

MAPS-1110

Message: Policy <Policy name> is created.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified policy was created in the system.

Recommended Action: Make sure the configuration change is expected.

MAPS-1111

Message: Policy <Policy name> is deleted.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified policy was deleted from the system.

Recommended Action: Make sure the configuration change is expected.

MAPS-1112

Message: Policy <Source Policy name> cloned to <Target Policy name>.

Message Type: LOG | AUDIT

Class: MAPS

Severity: INFO

Probable Cause: Indicates that the specified policy was cloned in the system.

Recommended Action: Make sure the configuration change is expected.

MAPS-1113

Message: Policy <Policy name> activated.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified policy was activated in the system.

Recommended Action: Make sure the configuration change is expected.

MAPS-1114

Message: Rule <Rule name> added to Policy <Policy name>.

Message Type: LOG | AUDIT

Class: MAPS

Severity: INFO

Probable Cause: Indicates that the specified rule was added to the specified policy.

Recommended Action: Make sure the configuration change is expected.

MAPS-1115

Message: Rule <Rule name> deleted from Policy <Policy name>.

Message Type: LOG | AUDIT

Class: MAPS

Severity: INFO

Probable Cause: Indicates that the specified rule was deleted from the specified policy.

Recommended Action: Make sure the configuration change is expected.

MAPS-1116

Message: Policy <Policy name> updated.

Message Type: LOG | AUDIT

Class: MAPS

Severity: INFO

Probable Cause: Indicates that the specified policy was updated.

Recommended Action: Make sure the configuration change is expected.

MAPS-1120

Message: Group <Group name> created.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified group was created.

Recommended Action: Make sure the configuration change is expected.

MAPS-1121

Message: Group <Group name> deleted.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified group was deleted.

Recommended Action:Make sure the configuration change is expected.

MAPS-1122

Message: Group <Source group name> cloned to <Target group name>.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified group was cloned.

Recommended Action: Make sure the configuration change is expected.

MAPS-1123

Message: Group <Group name> modified.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified group was modified.

Recommended Action: Make sure the configuration change is expected.

MAPS-1124

Message: Flow <Flow name> imported.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified flow from Flow Vision is imported into MAPS.

Recommended Action: Make sure the configuration change is expected.

MAPS-1125

Message: Flow <Flow name> deimported.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified flow was removed from MAPS.

Recommended Action:Make sure the configuration change is expected.

MAPS-1126

Message: Imported flow <Flow name> is a stale flow or currently does not exist in flow vision.

Message Type: LOG

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified flow does not exist in Flow Vision.

Recommended Action: Make sure the configuration change is expected.

MAPS-1127

Message: Imported flow <Flow name> is initialized as stale flow because it is <Flow description>.

Message Type: LOG

Class: MAPS

Severity:INFO

Probable Cause: Indicates that MAPS has imported the specified flow present in the configuration and initialized it as stale flow due to the mentioned reason.

Recommended Action: Make sure the configuration change is expected.

MAPS-1130

Message: Actions <List of actions configured> configured.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the specified list of actions are configured.

Recommended Action: Make sure the configuration change is expected.

MAPS-1131

Message: Monitoring on members <List of members/objects > of type <Type of members/objects> is paused.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that monitoring on the specified list of members is paused.

Recommended Action: Make sure the configuration change is expected.

MAPS-1132

Message: Monitoring on members <List of members/objects > of type <Type of members/objects> has resumed.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that monitoring on the specified list of members has resumed.

Recommended Action: Make sure the configuration change is expected.

MAPS-1200

Message: Fabric Watch Thresholds are converted to MAPS policies.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that the current Fabric Watch configuration has converted to corresponding MAPS policies.

Recommended Action: Verify the MAPS policies and make sure the rules are valid before enabling MAPS.

MAPS-1201

Message: MAPS has started monitoring with <Policy name> policy and Fabric Watch is disabled from monitoring.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that MAPS has started monitoring the system and therefore Fabric Watch monitoring has been disabled.

Recommended Action: Make sure the configuration change is expected.

MAPS-1202

Message: MAPS Disabled.

Message Type: LOG | AUDIT

Class: MAPS

Severity:INFO

Probable Cause: Indicates that MAPS has been disabled. MAPS will continue to monitor the system until reboot .

Recommended Action: Make sure the configuration change is expected. To activate Fabric Watch monitoring and disable MAPS, reboot or fail over the system.

MAPS-1203

Message: dashboard <data type> data has been cleared.

Message Type: LOG | AUDIT

Class: MAPS

Severity:WARNING

Probable Cause: Indicates that the dashboard has been cleared.

Recommended Action: No action is required.