WEBD Messages

WEBD-1001

Message:Missing or Invalid Certificate file -- HTTPS is configured but could not be started.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates the SSL certificate file is either invalid or absent.

Recommended Action: Install a valid key file.

WEBD-1002

Message: Missing or Invalid Key file -- HTTPS is configured but could not be started.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates the SSL key file is either invalid or absent.

Recommended Action: Install a valid key file.

WEBD-1004

Message: HTTP server and weblinker process will be restarted due to configuration change

Message Type: LOG

Severity: INFO

Probable Cause: Indicates the HTTP server configuration has changed.

Recommended Action: No action is required.

WEBD-1005

Message: HTTP server and weblinker process will be restarted for logfile truncation

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates the size of the HTTP logfile exceeded the maximum limit.

Recommended Action: No action is required.

WEBD-1006

Message: HTTP server and weblinker restarted due to logfile truncation

Message Type: LOG

Severity: INFO

Probable Cause: Indicates the size of the HTTP log file exceeded the maximum limit.

Recommended Action: No action is required.

WEBD-1007

Message: HTTP server and weblinker process will be restarted due to change of IP Address

Message Type: LOG

Severity: INFO

Probable Cause: Indicates the IP address of the switch changed and the HTTP server is restarted.

Recommended Action: No action is required.

WEBD-1008

Message: HTTP server and weblinker process cannot be started

Message Type: LOG | FFDC

Severity: WARNING

Probable Cause: Indicates a rare error condition, where the built-in recovery process has failed to restore http services. The problem often results from invalid configuration of SSL certificates, but therecan be more than one reason for such a failure.

Recommended Action: Verify the certification file as there may be a mismatch involved.

WEBD-1009

Message: <INFO %s>

Message Type: LOG

Severity: INFO

Probable Cause: Indicates that the HTTP or HTTPS server configuration has changed.

Recommended Action: No action is required.