IGMP Messages

IGMP-1001

Message:MsgQ enqueue failed (rc: <rc>).

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates an internal inter-process communication (IPC) failure due to the scalability scenario.

Recommended Action: Reduce the number of groups and MRouter ports.

IGMP-1002

Message: IPC with McastSS failed (message-id: <message-id>, rc: <rc>).

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates an internal inter-process communication (IPC) failure due to the scalability scenario.

Recommended Action: Reduce the number of groups and MRouter ports.

IGMP-1004

Message: IGMP maximum VLANs enabled. Cannot enable IGMP on <vlan>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the number of VLANs on which Internet Group Multicast Protocol (IGMP) can be enabled has reached the maximum limit. Therefore, IGMP cannot be enabled on the specified VLAN.

Recommended Action: No action is required.

IGMP-1005

Message: IGMP snooping enabled on total <vlan> VLANs. Maximum limit reached.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the number of VLANs on which Internet Group Multicast Protocol (IGMP) can be enabled has reached the maximum limit.

Recommended Action: No action is required.

IGMP-1006

Message: IGMP snooping enabled on <vlan>.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the Internet Group Multicast Protocol (IGMP) is enabled on a particular VLAN.

Recommended Action: No action is required.