LACP Messages

LACP-1001

Message:<module> Error opening socket (<error>).

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates that initialization of the specified module within the Link Aggregation Control Protocol (LACP) daemon has failed.

Recommended Action: Download a new firmware version using the firmware download command.

LACP-1002

Message: <Component> Initialization failed.

Message Type: DCE

Severity: ERROR

Probable Cause: Indicates that an error occurred in the Link Aggregation Control Protocol (LACP) daemon.

Recommended Action: Take action specific to the error message.

LACP-1003

Message: Port-channel <PortChannelKey> up in defaulted state.

Message Type: DCE

Severity: INFO

Probable Cause:

Recommended Action: No action required.

LACP-1004

Message: Port-channel <PortChannelKey> down from defaulted state.

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that the specified port channel is down from the defaulted state.

Recommended Action: No action required.

LACP-1005

Message: LACP <LinkName>:Could be a SSPA mismatch: New Actor Port <PduActorPort>, Old Actor Port <LinkPartnerPort>, New Partner Port: <PduPartnerPort> , Old Partner Port: <LinkActorPort>

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that wrong PDU is trapped a wrong port.

Recommended Action: No action required.

LACP-1006

Message: LACP <LinkName>: MUX state transition <Str 1> to <Str 2><Str 3>

Message Type: DCE

Severity: INFO

Probable Cause: Indicates that PDU are not received on expected interval

Recommended Action: No action required.