CHS Messages

CHS-1002

Message: ki_gd_register_action failed with rc = <return value>.

Message Type: LOG | FFDC

Severity: ERROR

Probable Cause: Indicates an internal error

Recommended Action: Reload or power cycle the switch

CHS-1003

Message: Slot ENABLED but Not Ready during recovery, disabling slot = <slot number>, rval = <return value>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the slot state has been detected as inconsistent during or recovery.

Recommended Action: For a modular switch, execute the power-off and power-on commands to power cycle the interface module.

For a compact switch, reload or power cycle the switch.

CHS-1004

Message: Interface module attach failed during recovery, disabling slot = <slot number>, rval = <return value>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the specified interface module has failed during or recovery.

Recommended Action: For a modular switch, execute the power-off and power-on commands to power cycle the interface module.

For a compact switch, reload or power cycle the switch.

CHS-1005

Message: Diag attach failed during recovery, disabling slot = <slot number>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the diagnostic interface module attach operation has failed during or recovery.

Recommended Action: For a modular switch, execute the power-off and power-on commands to power cycle the interface module.

For a compact switch, reload or power cycle the switch.