SULB Messages

SULB-1000

Message: The firmware download command has been started.

Message Type: AUDIT | LOG

Class: FIRMWARE

Severity: WARNING

Probable Cause: Indicates that firmware download has started.

Recommended Action: No action is required.

SULB-1100

Message:Firmware <firmware operations: install, swap, reboot, commit, recover> begins on <slot/partition>.

Message Type:AUDIT | LOG

Class: FIRMWARE

Severity: INFO

Probable Cause: Indicates that the specified firmware operation has started on the specified slot or partition.

Recommended Action: No action is required.

SULB-1101

Message: Firmware <firmware operations: install, swap, reboot, commit, recover> ends on <slot/partition>.

Message Type: AUDIT | LOG

Class: FIRMWARE

Severity: INFO

Probable Cause: Indicates that the specified firmware operation has completed successfully on the specified slot or partition.

Recommended Action: No action is required.

SULB-1102

Message: Firmware <firmware operations: install, swap, reboot, commit, recover> failed on <slot/partition> with error (<error code>).

Message Type: AUDIT | LOG

Class: FIRMWARE

Severity: WARNING

Probable Cause: Indicates that specified firmware operation has failed on the specified slot or partition. The error code indicates the reason for the failure.

The following table lists the error codes that provide more details on why the firmware operation failed.
Error message Error code

"Upgrade is inconsistent."

0x10

"OSRootPartition is inconsistent."

0x11

"Unable to access the package list file. Check whether the file name is specified properly."

0x12

"Red Hat package manager (RPM) package database is inconsistent. Contact your service provider for recovery."

0x13

"Out of memory."

0x14

"Failed to download RPM package. Check if the firmware image is accessible."

0x15

"Unable to create firmware version file."

0x16

"Unexpected system error."

0x17

"Another firmware download is in progress."

0x18

"Error in releasing lock device."

0x19

"firmware commit failed."

0x1a

"Firmware directory structure is not compatible. Check whether the firmware is supported on this platform."

0x1b

"Failed to load the Linux kernel image. Contact your service provider to assistance."

0x1c

"OSLoader is inconsistent.

0x1d

"New image has not been committed. Execute the firmware commit command or the firmware restore and firmware download commands."

0x1e

"firmware restore is not needed."

0x1f

"Images are not mounted properly."

0x20

"Unable to uninstall old packages. Contact your service provider for assistance."

0x21

"firmware download has timed out."

0x23

"Out of disk space."

0x24

"Primary filesystem is inconsistent. Execute the firmware restore to restore the original firmware, or contact your service provider for recovery."

0x25

"The post-install script failed."

0x26

"Reload (partition) failed."

0x27

"Primary kernel partition is inconsistent. Contact your service provider for recovery."

0x28

"The pre-install script failed."

0x29

"Failed to install RPM package."

0x2b

"Cannot downgrade directly to this version. Downgrade to an intermediate version and then download the desired version."

0x2c

"Failed to validate firmware signature."

0x3e

"Failed to swap the firmware partitions."

0x40

"Failed to load the PROM image. Contact your service provider for assistance."

0x41

Recommended Action: Execute the show firmwaredownloadstatus command for more information. Restart the firmware operation if needed.

SULB-1103

Message:Firmware download completed successfully on <slot/partition>.

Message Type:AUDIT | LOG

Class: FIRMWARE

Severity: INFO

Probable Cause: Indicates that the specified firmware download has completed successfully on the specified slot or partition.

Recommended Action: No action is required.

Execute the show firmwaredownloadstatus command for more information. Execute the show version to verify the firmware version.

SULB-1104

Message: Firmware download <failed or failed but recovered> on <node name> with error (<error code>).

Message Type: AUDIT | LOG

Class: FIRMWARE

Severity: CRITICAL

Probable Cause: Indicates that firmware download has failed on the specified slot. The error code indicates the reason for the failure.

The following table lists the error codes that provide more details on why the firmware operation failed.
Error message Error code

"No error."

0x0

"Upgrade is inconsistent."

0x10

"OSRootPartition is inconsistent."

0x11

"Unable to access the package list file. Check whether the file name is specified properly."

0x12

"Red Hat package manager (RPM) package database is inconsistent. Contact your service provider for recovery."

0x13

"Out of memory."

0x14

"Failed to download RPM package. Check if the firmware image is accessible."

0x15

"Unable to create firmware version file."

0x16

"Unexpected system error."

0x17

"Another firmware download is in progress."

0x18

"Error in releasing lock device."

0x19

"firmware commit failed."

0x1a

"Firmware directory structure is not compatible. Check whether the firmware is supported on this platform."

0x1b

"Failed to load the Linux kernel image. Contact your service provider to assistance."

0x1c

"OSLoader is inconsistent.

0x1d

"New image has not been committed. Execute the firmware commit command or the firmware restore and firmware download commands."

0x1e

"firmware restore is not needed."

0x1f

"Images are not mounted properly."

0x20

"Unable to uninstall old packages. Contact your service provider for assistance."

0x21

"firmware download has timed out."

0x23

"Out of disk space."

0x24

"Primary filesystem is inconsistent. Execute the firmware restore to restore the original firmware, or contact your service provider for recovery."

0x25

"The post-install script failed."

0x26

"Reload (partition) failed."

0x27

"Primary kernel partition is inconsistent. Contact your service provider for recovery."

0x28

"The pre-install script failed."

0x29

"Failed to install RPM package."

0x2b

"Cannot downgrade directly to this version. Downgrade to an intermediate version and then download the desired version."

0x2c

"Failed to validate firmware signature."

0x3e

"Failed to swap the firmware partitions."

0x40

"Failed to load the PROM image. Contact your service provider for assistance."

0x41

Recommended Action: Execute the show firmwaredownloadstatus command for more information. Execute the power-off and power-on commands on the slot for recovery.

SULB-1105

Message: Firmware upgrade session (<session ID>: <session subject>) starts.

Message Type: AUDIT | LOG

Class: FIRMWARE

Severity: WARNING

Probable Cause: Indicates that firmware upgrade has started.

Recommended Action: No action is required.

SULB-1106

Message: Firmware upgrade session (<session ID>: <session subject>) completes.

Message Type: AUDIT | LOG

Class: FIRMWARE

Severity: WARNING

Probable Cause: Indicates that firmware upgrade has completed successfully.

Recommended Action: Execute the show firmwaredownloadstatus command for more information.

SULB-1107

Message: Firmware upgrade session (<session ID>: <session subject>) failed but recovered.

Message Type: LOG

Class: FIRMWARE

Severity: WARNING

Probable Cause: Indicates that firmware upgrade has failed but was recovered.

Recommended Action: Execute the show firmwaredownloadstatus command for more information.

Execute the firmware download command again if needed.

SULB-1108

Message: Firmware upgrade session (<session ID>: <session subject>) failed.

Message Type: LOG

Class: FIRMWARE

Severity: CRITICAL

Probable Cause: Indicates that firmware upgrade has failed.

Recommended Action: Execute the show firmwaredownloadstatus command for more information.

Execute the firmware download command again if needed.

SULB-1109

Message: Firmware upgrade session (<session ID>: <session subject>) aborted.

Message Type: LOG

Class: FIRMWARE

Severity: CRITICAL

Probable Cause: Indicates that firmware upgrade has been aborted.

Recommended Action:

Execute the firmware download command again if needed.

SULB-1110

Message: Firmware upgrade session (<session ID>: <session subject>) has completed the installation successfully.

Message Type: LOG

Class: FIRMWARE

Severity: WARNING

Probable Cause: Indicates that firmware upgrade has completed.

Recommended Action: No action is required.