Message: <INFO %s>.
Message Type: LOG
Severity: ERROR
Probable Cause: Indicates a configuration error.
Recommended Action: Make sure to input or pass the right parameter through the CLI or other daemon.
Message: <INFO %s %s %s>.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates a Border Gateway Protocol (BGP) interface state change or external link-state database (LSDB) overflow notification.
Recommended Action: No action is required.
Message: <ERROR packet error, %s %s>.
Message Type: LOG
Severity: ERROR
Probable Cause: Indicates that the length, format, or content of the received packet is incorrect.
Recommended Action:Check the configuration at the local or remote node.
Message: <INFO BGP: Neighbor %s on VRF %s DOWN (%s)>.
Message Type: LOG
Severity: WARNING
Probable Cause: Indicates a Border Gateway Protocol (BGP) interface state change or external link-state database (LSDB) overflow warning.
Recommended Action:No action is required.
Message: <INFO BGP: Neighbor %s on VRF %s UP (ESTABLISHED)>.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates a Border Gateway Protocol (BGP) Peer Session state UP.
Recommended Action:No action is required.
Message: <INFO BGP: Neighbor %s on VRF %s DOWN (%s:%s)>.
Message Type: LOG
Severity: INFO
Probable Cause: Indicates a Border Gateway Protocol (BGP) Peer Session state DOWN.
Recommended Action:No action is required.
Message: <CRITICAL BGP Process Restarted Cold>.
Message Type: LOG
Severity: CRITICAL
Probable Cause: Indicates a Border Gateway Protocol (BGP). Process restarted Cold.
Recommended Action:No action is required.
Message: <CRITICAL %s: Memory reached %s>. Review BGP Route scale supported on this platform.
Message Type: LOG
Severity: WARNING
Probable Cause: Indicates the current memory usage.
Recommended Action:No action is required.
Message: < Warning : (%s)BGP EVPN route dampened due to frequent moves >.
Message Type: LOG
Severity: WARNING
Probable Cause: Indicates routes dampened due to frequent moves.
Recommended Action:No action is required.
Message: <BGP : No. of prefix received from BGP peer %s: exceeded %s limit %u>.
Message Type: LOG
Severity: WARNING
Probable Cause: Indicates no. of prefixes received from a peer have reached max/warning limit.
Recommended Action:No action is required.
Message: <WARNING : The stanza %d in the Flowspec route-map %s can not be advertised by BGP, as the NLRI length needed by match criteria is greater than seq_num>.
Message Type: LOG
Severity: WARNING
Probable Cause:Indicates flowspec route-map can't be advertised by BGP.
Recommended Action:No action is required.
Message: <WARNING : The stanza %d in route-map %s is going to be active local %s route as the current active stanza %d with same match and set contentseq_num>.
Message Type: LOG
Severity: WARNING
Probable Cause:flowspec rule gets generated from dup rmap stanza when the original stanza is modified.
Recommended Action:No action is required.
Message: <WARNING : The stanza %d in route-map %s can not form a local %s route as it has same match and set content as current active stanza %d>.
Message Type: LOG
Severity: WARNING
Probable Cause:flowspec rule is not generated from duplicate rmap stanza.
Recommended Action:No action is required.
Message: <WARNING: Not all the prefixes from the in-bound prefix list %s can be sent to %s in ORF message, as there are many prefixes >.
Message Type: LOG
Severity: WARNING
Probable Cause:BGP ORF Prefix list send limit reached.
Recommended Action:No action is required.
Message: <WARNING TCP flags match sub-component is more than a byte in the %s Flowspec rules %s%s%s, so the rule is not listed>.
Message Type: LOG
Severity: WARNING
Probable Cause:TCP flags match sub-component is more than a byte in the Flowspec rule.
Recommended Action:No action is required.
Message: <WARNING: MAC address mismatch for Virtual IP/IPV6 address %s Local MAC: [%s} Recv MAC: [%s] for Interface %s>.
Message Type: LOG
Severity: WARNING
Probable Cause:Mac-address mismatch.
Recommended Action:No action is required.
Message: <WARNING:IP configured is not SAG for IP/IPV6 address %s for Interface: %s>.
Message Type: LOG
Severity: WARNING
Probable Cause:IP configured is not SAG.
Recommended Action:No action is required.
Message: <WARNING: Mismatch for virtual IPV6 address %s Recv MAC: [%s] for Revc tag: [%d]>.
Message Type: LOG
Severity: WARNING
Probable Cause:Mismatch for virtual IPV6.
Recommended Action:No action is required.
Message: <WARNING BGP: afi-%d safi-%d No. of add-path NLRIs for prefix %s/%d received from Peer %s: exceeded maximum limit %d. NLRI 0x%x dropped>.
Message Type: LOG
Severity: WARNING
Probable Cause:NLRI dropped.
Recommended Action:No action is required.
Message: <WARNING BGP: No. of prefix received from BGP peer %s : exceeded Maximum prefix limit. Peer is shutdown>.
Message Type: LOG
Severity: WARNING
Probable Cause:Peer is shutdown
Recommended Action:No action is required.
Message: <INFO BGP : RPKI session for TCP Server: %s on Port : %s is %s. >.
Message Type: LOG
Severity: WARNING
Probable Cause:RPKI session for TCP Server.
Recommended Action:No action is required.
Message: <INFO BGP : RPKI session for SSH Server: %s on Port : %d is %s.>.
Message Type: LOG
Severity: WARNING
Probable Cause:RPKI session for SSH Server.
Recommended Action:No action is required.
Message: <INFO BGP:Neighbor %s on VRF %s enters into Dampened state>.
Message Type: LOG
Severity: WARNING
Probable Cause:VRF %s enters into Dampened state
Recommended Action:No action is required.
Message: <INFO BGP : Neighbor %s on VRF %s Moves out from Dampened state>.
Message Type: LOG
Severity: WARNING
Probable Cause:VRF %s Moves out from Dampened state.
Recommended Action:No action is required.