VLAN statistics

Use the statistics command in the VLAN configuration mode to enable statistics on a VLAN.

Note

Statistics has to be manually enabled for a specific VLAN, since it is not enabled by default for VLANs.

Please note that:

• The statistics reported are not real-time statistics since they depend upon the load on the system.
• Statistics has to be manually enabled for a specific VLAN. This ensures better utilization of the statistics resources in the hardware.
• Statistics for VLANs with VE interfaces consider only the switched frames. Packets which are routed into or out of the VE interface are not counted.
• Enabling statistics on a VLAN has a heavy impact on the data traffic.