Displaying MAC address information for VPLS bridge domains

• Enter the show mac-address-table bridge-domain command to display information about MAC addresses in VPLS bridge domains. The following example shows details of all MAC addresses learned on all bridge domains.
  

  device# show mac-address-table bridge-domain all
  	
  VlanId/BD-Id   Mac-address 		  Type     State     Ports/LIF/peer-ip
  629(B)	        0011.2222.5555 	Dynamic  Active    eth 1/3.100
  629(B)	        0011.2222.6666 	Dynamic  Inactive  eth 1/1.500
  629(B)	        0011.2222.1122 	Dynamic  Active    10.12.12.12
  629(B)	        0011.2222.3333 	static   Inactive  po 5.700
  629(B)	        0011.0101.5555 	Dynamic  Active    eth 1/2.400
  
  Total MAC addresses : 5
  

• Enter the show mac-address-table bridge-domain command specifying a bridge domain to display information about MAC addresses for a specific bridge domain.
  

  device# show mac-address-table bridge-domain 1
   	
  BD-Name   Mac-address     Type     State     Ports/LIF/Peer-IP
  1         0011.2222.5555  Dynamic  Active    eth 1/3.200
  1         0011.2222.6666  Dynamic  Inactive  eth 2/2.500
  
  Total MAC addresses : 2