Message:interface <InterfaceName> is online.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has come online after the protocol dependencies are resolved.
Recommended Action: No action is required.
Message: interface <InterfaceName> is protocol down.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has gone offline because one of the protocol dependency is unresolved.
Recommended Action: Check for the reason codes using the show interface command and resolve the protocol dependencies.
Message: interface <InterfaceName> is link down.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has gone offline because the link was down.
Recommended Action: Check whether the connectivity is proper and the remote link is up.
Message: <InterfaceName> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface has been created
Recommended Action: No action is required.
Message: Chassis is <status>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the chassis has been enabled or disabled.
Recommended Action: No action is required.
Message: <InterfaceName> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface has been deleted.
Recommended Action: No action is required.
Message: InterfaceMode changed from <Mode_old> to <Mode_new> for interface <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface mode has been changed.
Recommended Action: No action is required.
Message: OperationalEndpointMode changed from <Mode_old> to <Mode_new> for interface <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface operational endpoint mode has been changed.
Recommended Action: No action is required.
Message: VLAN classifier group <group_id> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier group has been created.
Recommended Action: No action is required.
Message: VLAN classifier group <group_id> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier group has been deleted.
Recommended Action: No action is required.
Message: VLAN classifier rule <rule_id> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier rule has been created.
Recommended Action: No action is required.
Message: VLAN classifier rule <rule_id> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier rule has been deleted.
Recommended Action: No action is required.
Message: VLAN classifier rule <rule_id> is <action> on VLAN classifier group <group_id>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier group has been modified.
Recommended Action: No action is required.
Message: Interface <InterfaceName> is <action> on interface <Logical_InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface member list has been changed.
Recommended Action: No action is required.
Message: <count> VLANs <except> will be allowed on interface <Logical_InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the VLAN membership has been changed for the specified interface.
Recommended Action: No action is required.
Message: Interface <InterfaceName> is administratively up.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface administrative status has changed to up.
Recommended Action: No action is required.
Message: Interface <InterfaceName> is administratively down.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface administrative status has changed to down.
Recommended Action: No action is required.
Message: Interface IP overlap with management IP <ipAddr> ifname:<ifname>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the IP address configured on the interface overlaps with the management IP address.
Recommended Action:Change the interface IP address using the ip address command.
Message: FCoE configuration has been <Option> on interface <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) configuration has been enabled or disabled on the specified interface.
Recommended Action: No action is required.
Message: <SFPType> transceiver for interface <InterfaceName> is inserted.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that a (SFP/CFP2) transceiver has been inserted in the specified interface.
Recommended Action: No action is required.
Message: <SFPType> transceiver for interface <InterfaceName> is removed.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that a transceiver (SFP or CFP2) has been removed from the specified interface.
Recommended Action: No action is required.
Message: Incompatible SFP transceiver for interface <InterfaceName> is detected.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an incompatible small form-factor pluggable (SFP) transceiver for the interface has been inserted.
Recommended Action: Disable the interface using the shutdown command and insert an SFP transceiver that is supported on the interface. After the SFP transceiver is inserted, re-enable the interface using the no shutdown command.
Message: Failed to read SFP transceiver for interface <InterfaceName>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates failure to read the small form-factor pluggable (SFP) transceiver for the specified interface.
Recommended Action: Disable the interface using the shutdown command and re-insert the SFP transceiver. After the SFP transceiver is inserted, re-enable the interface using the no shutdown command. If the problem persists, contact your switch service provider.
Message: Interface <InterfaceName> is administratively down due to speed mismatch in port-channel.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has gone down due to mismatching speed in the port-channel.
Recommended Action: Set the correct speed for the interface using the speed command.
Message: Session <SessionNumber> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified session has been created.
Recommended Action: No action is required.
Message: Session <SessionNumber> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified session has been deleted.
Recommended Action: No action is required.
Message: Session <SessionNumber> configuration is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified session configuration has been deleted.
Recommended Action: No action is required.
Message: Session <SessionNumber> configuration is added.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the specified session configuration has been added.
Recommended Action: No action is required.
Message: Description for Session <SessionNumber> is added.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the session description has been added.
Recommended Action: No action is required.
Message: Description for Session <SessionNumber> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the session description has been deleted.
Recommended Action: No action is required.
Message: Interface <InterfaceName> is administratively down due to <LinkSpeed> link configured on Extreme Trunk.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified interface has gone down because a 1 Gbps link has been configured on the Extreme trunk.
Recommended Action: Remove the 1 Gbps link from the Extreme trunk or change the 1 Gbps small form-factor pluggable (SFP) transceiver.
Message: Private VLAN mode changed from <Mode_old> to <Mode_new> for interface <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the interface private VLAN mode has been changed.
Recommended Action: No action is required.
Message: Unsupported Extreme-branded SFP transceiver for interface <InterfaceName> is detected.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an unsupported Extreme-branded small form-factor pluggable (SFP) transceiver has been inserted in the specified interface.
Recommended Action: Use a Extreme-branded SFP transceiver for the interface because the digital diagnostics will not be supported.
Message: Interface <InterfaceName> is unprovisioned.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface has been unprovisioned.
Recommended Action: No action is required.
Message: interface <InterfaceName> is provisioned.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified logical interface has been provisioned.
Recommended Action: No action is required.
Message: Unqualified SFP transceiver for interface <InterfaceName> is detected.
Message Type: DCE
Severity:WARNING
Probable Cause: Indicates that an unqualified Extreme-branded small form-factor pluggable (SFP) transceiver has been inserted in the specified interface.
Recommended Action: Use a qualified Extreme-branded SFP transceiver for the interface because the digital diagnostics will not be supported.
Message: Unsupported SFP transceiver for interface <InterfaceName> is detected.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an unsupported small form-factor pluggable (SFP) transceiver has been inserted in the specified interface.
Recommended Action: Use a qualified Extreme-branded SFP transceiver for the interface because the digital diagnostics will not be supported.
Message: interface <InterfaceName> is disabled by port link dampening.
Message Type: DCE
Severity:INFO
Probable Cause: Indicates that the interface disabled due to port link dampening.
Recommended Action: No action is required.
Message: interface <InterfaceName> is enabled by port link dampening.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the interface enabled due to port link dampening.
Recommended Action: No action is required.
Message: Topology group <TopoGrpId> master VLAN replaced from <OldmasterVlan> to <NewmasterVlan>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the master VLAN for the topology group has been replaced.
Recommended Action: No action is required.
Message: <VlanBd> <VlanBdId> configured as <MasterMember> of Topology group <TopoGrpId>.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates the VLAN/BD is configured as master/member for the topology group.
Recommended Action: No action is required.
Message: <VlanBd> <VlanBdId> removed from Topology group <TopoGrpId>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates the master/member VLAN/BD removed from the topology group.
Recommended Action: No action is required.
Message: Topology group <TopoGrpId> deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates topology group is deleted.
Recommended Action: No action is required.
Message: Message type <MessageType> length <MessageSize> from <ClientName> is too large.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that a message from the NSM client could not be processed because of its size.
Recommended Action:Increase size of NSM daemon buffer.
Message: <InterfaceName> interface is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified physical/insight interface has been deleted.
Recommended Action: No action is required.
Message: IP unnumbered intf <InterfaceName> vrf must be same as donor inttf <InterfaceName> .
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that ip unnumbered interface vrf is not same as donor interface vrf .
Recommended Action:Both unnumbered interface and donor interface vrf should be same.
Message: interface <InterfaceName> TAG Type Changed to 0x<tpid>.
Message Type: DCE
Severity: ERROR, INFO. The severity will depend on the TAG Type ID, tpid.
Probable Cause:Indicates that interface TAG Type is being configured.
Recommended Action: No action is required.
Message: fec mode <RS-FEC | FC-FEC | Auto-Negotiation | Disabled>
Message Type: DCE
Severity: ERROR
Probable Cause: This message is generated for all unsupported FEC modes on 100G optics(Passive DAC/SR4/LR4) , 40G and 10G from NSM module.
Recommended Action: Confirm the supported FEC modes for the optic in question with the Release Notes. Verify that the optic is configured for the appropriate FEC mode. If you attempt to configure any mode other than a supported mode for that optic, then an Error Message will be generated.
Message: Tunnel <TunnelName> creation failed.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the tunnel creation was unsuccessful.
Recommended Action: Technical support is required.
Message: VNI mapping for VLAN <VLAN> was unsuccessful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that system could not map VNI to the VLAN for a VxLAN tunnel.
Recommended Action: Technical support is required.
Message: Enabling flooding for <TunnelName> was unsuccessful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that system could not enable flooding for the specific tunnel.
Recommended Action: Technical support is required.
Message: P2P BD <BDId> not extended Vxlan Tunnel <TunnelName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that system could not extend p2p BD on vxlan tunnel.
Recommended Action: P2P BD can not be extended over vxlan tunnel.
Message: Port-profile <ProfileName> activation succeeded.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the profile activation was successful.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> activation failed, reason <Reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the profile activation was unsuccessful.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Port-profile <ProfileName> deactivation succeeded.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the profile deactivation was successful.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> deactivation failed, reason <Reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the profile deactivation was unsuccessful.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Port-profile <ProfileName> application succeeded on <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the profile application was successful.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> application failed on <InterfaceName>, reason <Reason>, removing any applied configuration.
Message Type: DCE
Severity:ERROR
Probable Cause: Indicates that the profile application on the specified interface was unsuccessful.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Port-profile <ProfileName> removed successfully on <InterfaceName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified port-profile has been removed successfully.
Recommended Action: No action is required.
Message: interface <InterfaceName> became port-profile-port.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the port-profile configuration mode has been enabled on the specified interface using the port-profile-port command.
Recommended Action: No action is required.
Message: Interface <InterfaceName> became non-port-profile-port.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the port-profile configuration mode has been disabled on the specified interface using the no port-profile-port command.
Recommended Action: No action is required.
Message: Interface <InterfaceName> could not become non-port-profile-port.
Message Type: DCE
Severity: ERROR
Probable Cause:Indicates that the port-profile configuration mode could not be disabled on the specified interface using the no port-profile-port command.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Port-profile <ProfileName> removal failed on <InterfaceName>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the specified port-profile could not be removed.
Recommended Action: Execute the copy support command and contact your switch service provider.
Message: MAC <ProfileMac> is associated to port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful association of the Virtual Machine (VM) Media Access Control (MAC) address with the specified port-profile.
Recommended Action: No action is required.
Message: MAC <ProfileMac> is disassociated from port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful disassociation of the Virtual Machine (VM) Media Access Control (MAC) address from the specified port-profile.
Recommended Action: No action is required.
Message: VLAN sub-profile for port-profile <ProfileName> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Cause Indicates that the VLAN sub-profile has been created successfully.
Recommended Action: No action is required.
Message: Access VLAN <VlanId> is configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the untagged VLAN has been configured for the specified port-profile.
Recommended Action: No action is required.
Message: Access VLAN is deleted from port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the untagged VLAN has been removed from the specified port-profile.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> is configured for switching properties.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the switching properties have been configured on the specified port-profile using the switchport command.
Recommended Action: No action is required.
Message: Switching properties are removed for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the switching properties have been removed from the specified port-profile using the no switchport command.
Recommended Action: No action is required.
Message: The <ModeName> mode is configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified mode has been configured for the port-profile using the switchport mode command.
Recommended Action: No action is required.
Message: The <ModeName> mode is de-configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified mode has been removed for the port-profile using the switchport mode command.
Recommended Action: No action is required.
Message: The tagged VLANs <TaggedVlanStr> are configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified tagged VLANs are configured in the VLAN sub-profile.
Recommended Action: No action is required.
Message: The tagged VLANs <TaggedVlanStr> are removed for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified tagged VLANs have been removed from the VLAN sub-profile.
Recommended Action: No action is required.
Message: The tagged VLANs except <TaggedVlanStr> are configured for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that except the specified tagged VLANs, all other tagged VLANs are configured in the VLAN sub-profile.
Recommended Action: No action is required.
Message: All VLANs are configured as tagged VLANs for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that all the available tagged VLANs are configured in the specified VLAN sub-profile.
Recommended Action: No action is required.
Message: All tagged VLANs are removed for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that all the available tagged VLANs have been from the specified VLAN sub-profile.
Recommended Action: No action is required.
Message: Native VLAN <VlanId> is configured to port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the native VLAN has been configured for the specified port-profile.
Recommended Action: No action is required.
Message: Native VLAN is deleted from port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the native VLAN has been removed from the specified port-profile.
Recommended Action: No action is required.
Message: FCoE sub-profile for port-profile <ProfileName> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) sub-profile has been created for the specified port-profile.
Recommended Action: No action is required.
Message: FCoE port is configured successfully for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) port has been configured for the specified port-profile.
Recommended Action: No action is required.
Message: FCoE port is removed successfully for port-profile <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) port has been removed from the specified port-profile.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified port-profile has been created successfully.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> is removed.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the specified port-profile has been removed successfully.
Recommended Action: No action is required.
Message: VLAN sub-profile for port-profile <ProfileName> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the VLAN sub-profile has been deleted successfully.
Recommended Action: No action is required.
Message: FCoE sub-profile for port-profile <ProfileName> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Fibre Channel over Ethernet (FCoE) sub-profile has been deleted successfully.
Recommended Action: No action is required.
Message: Non-profiled-macs on profiled ports will be <allowflag>.
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that the non-profiled media access control (MAC) entries on the profiled port will be allowed or dropped.
Recommended Action: No action is required.
Message: Association of MAC address: <MAC> failed. Reason : <Reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an error occurred during port-profile to media access control (MAC) association.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: De-Association of MAC address: <MAC> failed. For Port-profile : <Reason>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that an error occurred during port-profile to media access control (MAC) de-association.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: Bulk MAC association is Success for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that all media access control (MAC) entries are successfully associated with the specified port-profile.
Recommended Action: No action is required.
Message: Bulk MAC de-association is Success for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that all media access control (MAC) entries are successfully de-associated with the specified port-profile.
Recommended Action: No action is required.
Message: Ctag <Ctag> is associated with Virtual Fabric <virtual fabric> for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful association of the c-tag with virtual fabric on the specified port-profile.
Recommended Action: No action is required.
Message: MAC <Mac> is associated with Virtual Fabric <virtual fabric> for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful association of Media Access Control (MAC) with virtual fabric on the specified port-profile.
Recommended Action: No action is required.
Message: Ctag <Ctag> is deassociated with Virtual Fabric <virtual fabric> for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful disassociation of the c-tag with virtual fabric on the specified port-profile.
Recommended Action: No action is required.
Message: MAC <Mac> is deassociated with Virtual Fabric <virtual fabric> for port-profile: <ProfileName>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates successful disassociation of Media Access Control (MAC) with virtual fabric on the specified port-profile.
Recommended Action: No action is required.
Message: Domain: <DomainName> creation successful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified domain is created.
Recommended Action: No action is required.
Message: Domain deletion <DomainName> successful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified domain is deleted.
Recommended Action: No action is required.
Message: Profile: <ProfileName> addition to domain <DomainName> successful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the port-profile is added to the specified domain.
Recommended Action: No action is required.
Message: Profile <ProfileName> deletion from domain <DomainName> successful.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the port-profile is deleted from the specified domain.
Recommended Action: No action is required.
Message: VLAN classifier mac-group <group_id> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the specified VLAN classifier MAC group has been created.
Recommended Action: No action is required.
Message: DAD failed for IPv6 address <IPv6 Address> on interface <Interface name>.
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the DHCP Auto Deployment (DAD) process failed for the specified IPv6 address.
Recommended Action: Delete the rejected IPv6 address and configure a corrected IPv6 address.
Message: Netdevice creation failed for interface <Interface name>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the system could not create a netdevice for the specified interface.
Recommended Action: No action is required.
Message: Port-profile <ProfileName> application failed on <InterfaceName>, for vlan <Vlan>, reason <Reason>
Message Type: DCE
Severity: ERROR
Probable Cause: Indicates that the profile application on the specified interface was unsuccessful.
Recommended Action: Check the configuration and port-profile status using the show port-profile status command. Execute the copy support command and contact your switch service provider.
Message: VLAN <VLAN ID> is <action> on interface <InterfaceName> for Client: <Client MAC> by Dot1x.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the Radius Dynamic VLAN is changed by dot1x.
Recommended Action: No action is required.
Message: Unnumbered Intf's peer ipv4 addr <IPv4 Address> is overlapped and can't be added on interface <InterfaceName>,reason <reason>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that invalid peer address is received.
Recommended Action: change unnumbered peer ipv4 address.
Message: Chassis beaconing is enabled
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that chassis beaconing is enabled
Recommended Action: No action is required.
Message: Chassis beaconing is disabled
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that chassis beaconing is disabled
Recommended Action: No action is required.
Message: Interface beaconing on <InterfaceName> is enabled
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that interface beaconing is enabled.
Recommended Action: No action is required.
Message: Interface beaconing on <InterfaceName> is disabled
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that interface beaconing is disabled.
Recommended Action: No action is required.
Message: Interface loopback on <Interface Name> is enabled
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that interface loopback is enabled.
Recommended Action: No action is required.
Message: Interface loopback on <Interface Name> is disabled
Message Type: DCE
Severity: INFO
Probable Cause:Indicates that interface loopback is disabled.
Recommended Action: No action is required.
Message: BD ID <BD ID> of type <BD Type> is Operationally UP.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the BD is operationally UP.
Recommended Action: No action is required.
Message: BD ID <BD ID> of type <BD Type> is Operationally DOWN.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the BD is operationally DOWN.
Recommended Action: No action is required.
Message: First pw lif in BD <BD ID> is Operationally UP.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the first pw lif in BD is operationally UP.
Recommended Action: No action is required.
Message: Last pw lif in BD <BD ID> is Operationally down.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the last pw lif in BD is operationally down.
Recommended Action: No action is required.
Message: Bridge Domain <BD ID> is created.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the BD is created.
Recommended Action: No action is required.
Message: Bridge Domain <BD ID> is deleted.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that the BD is deleted.
Recommended Action: No action is required.
Message: Logical interface(LIF) resource has reached user configured high threshold limit.
Message Type: DCE
Severity: INFO
Probable Cause: The LIF table has reached the user configured high threshold limit.
Recommended Action: Reduce the number of LIF entries in the table.
Message: Configuration of AC LIFs has reached the system max allowed AC LIFs.
Message Type: DCE
Severity: INFO
Probable Cause: The number of user configured AC LIFs has reached the system's maximum allowed AC LIFs.
Recommended Action: Reduce the number of user configured AC LIFs.
Message: <pkt-encap-processing feature> is <enable> on interface <interface>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates the config received from dcmd.
Recommended Action: No action is required.