BGP Messages

BGP-1001

Message: <INFO %s>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates a configuration error.

Recommended Action: Make sure to input or pass the right parameter through the CLI or other daemon.

BGP-1002

Message: <INFO %s %s %s>.

Message Type: LOG

Severity: INFO

Probable Cause: Indicates a Border Gateway Protocol (BGP) interface state change or external link-state database (LSDB) overflow notification.

Recommended Action: No action is required.

BGP-1003

Message: <ERROR packet error, %s %s>.

Message Type: LOG

Severity: ERROR

Probable Cause: Indicates that the length, format, or content of the received packet is incorrect.

Recommended Action:Check the configuration at the local or remote node.

BGP-1004

Message: <INFO BGP: Neighbor %s on VRF %s DOWN (%s)>.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates a Border Gateway Protocol (BGP) interface state change or external link-state database (LSDB) overflow warning.

Recommended Action:No action is required.

BGP-1005

Message: <INFO BGP: Neighbor %s on VRF %s UP (ESTABLISHED)>.

Message Type: LOG

Severity: INFO

Probable Cause: Indicates a Border Gateway Protocol (BGP) Peer Session state UP.

Recommended Action:No action is required.

BGP-1006

Message: <INFO BGP: Neighbor %s on VRF %s DOWN (%s:%s)>.

Message Type: LOG

Severity: INFO

Probable Cause: Indicates a Border Gateway Protocol (BGP) Peer Session state DOWN.

Recommended Action:No action is required.

BGP-1007

Message: <CRITICAL BGP Process Restarted Cold>.

Message Type: LOG

Severity: CRITICAL

Probable Cause: Indicates a Border Gateway Protocol (BGP). Process restarted Cold.

Recommended Action:No action is required.

BGP-1009

Message: <CRITICAL %s: Memory reached %s>. Review BGP Route scale supported on this platform.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates the current memory usage.

Recommended Action:No action is required.

BGP-1011

Message: < Warning : (%s)BGP EVPN route dampened due to frequent moves >.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates routes dampened due to frequent moves.

Recommended Action:No action is required.

BGP-1012

Message: <BGP : No. of prefix received from BGP peer %s: exceeded %s limit %u>.

Message Type: LOG

Severity: WARNING

Probable Cause: Indicates no. of prefixes received from a peer have reached max/warning limit.

Recommended Action:No action is required.

BGP-1013

Message: <WARNING : The stanza %d in the Flowspec route-map %s can not be advertised by BGP, as the NLRI length needed by match criteria is greater than seq_num>.

Message Type: LOG

Severity: WARNING

Probable Cause:Indicates flowspec route-map can't be advertised by BGP.

Recommended Action:No action is required.

BGP-1014

Message: <WARNING : The stanza %d in route-map %s is going to be active local %s route as the current active stanza %d with same match and set contentseq_num>.

Message Type: LOG

Severity: WARNING

Probable Cause:flowspec rule gets generated from dup rmap stanza when the original stanza is modified.

Recommended Action:No action is required.

BGP-1018

Message: <WARNING : The stanza %d in route-map %s can not form a local %s route as it has same match and set content as current active stanza %d>.

Message Type: LOG

Severity: WARNING

Probable Cause:flowspec rule is not generated from duplicate rmap stanza.

Recommended Action:No action is required.

BGP-1019

Message: <WARNING: Not all the prefixes from the in-bound prefix list %s can be sent to %s in ORF message, as there are many prefixes >.

Message Type: LOG

Severity: WARNING

Probable Cause:BGP ORF Prefix list send limit reached.

Recommended Action:No action is required.

BGP-1020

Message: <WARNING TCP flags match sub-component is more than a byte in the %s Flowspec rules %s%s%s, so the rule is not listed>.

Message Type: LOG

Severity: WARNING

Probable Cause:TCP flags match sub-component is more than a byte in the Flowspec rule.

Recommended Action:No action is required.

BGP-1021

Message: <WARNING: MAC address mismatch for Virtual IP/IPV6 address %s Local MAC: [%s} Recv MAC: [%s] for Interface %s>.

Message Type: LOG

Severity: WARNING

Probable Cause:Mac-address mismatch.

Recommended Action:No action is required.

BGP-1022

Message: <WARNING:IP configured is not SAG for IP/IPV6 address %s for Interface: %s>.

Message Type: LOG

Severity: WARNING

Probable Cause:IP configured is not SAG.

Recommended Action:No action is required.

BGP-1023

Message: <WARNING: Mismatch for virtual IPV6 address %s Recv MAC: [%s] for Revc tag: [%d]>.

Message Type: LOG

Severity: WARNING

Probable Cause:Mismatch for virtual IPV6.

Recommended Action:No action is required.

BGP-1024

Message: <WARNING BGP: afi-%d safi-%d No. of add-path NLRIs for prefix %s/%d received from Peer %s: exceeded maximum limit %d. NLRI 0x%x dropped>.

Message Type: LOG

Severity: WARNING

Probable Cause:NLRI dropped.

Recommended Action:No action is required.

BGP-1025

Message: <WARNING BGP: No. of prefix received from BGP peer %s : exceeded Maximum prefix limit. Peer is shutdown>.

Message Type: LOG

Severity: WARNING

Probable Cause:Peer is shutdown

Recommended Action:No action is required.

BGP-1026

Message: <INFO BGP : RPKI session for TCP Server: %s on Port : %s is %s. >.

Message Type: LOG

Severity: WARNING

Probable Cause:RPKI session for TCP Server.

Recommended Action:No action is required.

BGP-1027

Message: <INFO BGP : RPKI session for SSH Server: %s on Port : %d is %s.>.

Message Type: LOG

Severity: WARNING

Probable Cause:RPKI session for SSH Server.

Recommended Action:No action is required.

BGP-1028

Message: <INFO BGP:Neighbor %s on VRF %s enters into Dampened state>.

Message Type: LOG

Severity: WARNING

Probable Cause:VRF %s enters into Dampened state

Recommended Action:No action is required.

BGP-1029

Message: <INFO BGP : Neighbor %s on VRF %s Moves out from Dampened state>.

Message Type: LOG

Severity: WARNING

Probable Cause:VRF %s Moves out from Dampened state.

Recommended Action:No action is required.

BGP-1031

Message: INFO BGP: Advertise AC-influenced-DF-election capability is enabled on ethernet-segment %ethenet-segment-identifier%

Message Type: INFO

Severity: INFO

Probable Cause: AF-influenced-DF-election is enabled on a specific ES.

Recommended Action: No action is required.

BGP-1032

Message: INFO BGP: Advertise AC-influenced-DF-election capability is disabled on ethernet-segment %ethenet-segment-identifier%

Message Type: INFO

Severity: INFO

Probable Cause: AF-influenced-DF-election is disabled on a specific ES.

Recommended Action: No action is required.

BGP-1033

Message: INFO BGP: ES route sent with AC-influenced-DF-election for ethernet-segment %ethenet-segment-identifier%

Message Type: INFO

Severity: INFO

Probable Cause: ES route is sent with the AF-influenced-DF-election attribute for the specified ES.

Recommended Action: No action is required.

BGP-1034

Message: INFO BGP: DF election is trigged for ethernet-segment %ethenet-segment-identifier%.

Message Type: INFO

Severity: INFO

Probable Cause: DF election is triggered due to configuration changes for the specified ES.

Recommended Action: No action is required.