Message: The firmware download command has been started.
Message Type: AUDIT | LOG
Class: FIRMWARE
Severity: WARNING
Probable Cause: Indicates that firmware download has started.
Recommended Action: No action is required.
Message:Firmware <firmware operations: install, swap, reboot, commit, recover> begins on <slot/partition>.
Message Type:AUDIT | LOG
Class: FIRMWARE
Severity: INFO
Probable Cause: Indicates that the specified firmware operation has started on the specified slot or partition.
Recommended Action: No action is required.
Message: Firmware <firmware operations: install, swap, reboot, commit, recover> ends on <slot/partition>.
Message Type: AUDIT | LOG
Class: FIRMWARE
Severity: INFO
Probable Cause: Indicates that the specified firmware operation has completed successfully on the specified slot or partition.
Recommended Action: No action is required.
Message: Firmware <firmware operations: install, swap, reboot, commit, recover> failed on <slot/partition> with error (<error code>).
Message Type: AUDIT | LOG
Class: FIRMWARE
Severity: WARNING
Probable Cause: Indicates that specified firmware operation has failed on the specified slot or partition. The error code indicates the reason for the failure.
| Error message | Error code |
|---|---|
|
"Upgrade is inconsistent." |
0x10 |
|
"OSRootPartition is inconsistent." |
0x11 |
|
"Unable to access the package list file. Check whether the file name is specified properly." |
0x12 |
|
"Red Hat package manager (RPM) package database is inconsistent. Contact your service provider for recovery." |
0x13 |
|
"Out of memory." |
0x14 |
|
"Failed to download RPM package. Check if the firmware image is accessible." |
0x15 |
|
"Unable to create firmware version file." |
0x16 |
|
"Unexpected system error." |
0x17 |
|
"Another firmware download is in progress." |
0x18 |
|
"Error in releasing lock device." |
0x19 |
|
"firmware commit failed." |
0x1a |
|
"Firmware directory structure is not compatible. Check whether the firmware is supported on this platform." |
0x1b |
|
"Failed to load the Linux kernel image. Contact your service provider to assistance." |
0x1c |
|
"OSLoader is inconsistent. |
0x1d |
|
"New image has not been committed. Execute the firmware commit command or the firmware restore and firmware download commands." |
0x1e |
|
"firmware restore is not needed." |
0x1f |
|
"Images are not mounted properly." |
0x20 |
|
"Unable to uninstall old packages. Contact your service provider for assistance." |
0x21 |
|
"firmware download has timed out." |
0x23 |
|
"Out of disk space." |
0x24 |
|
"Primary filesystem is inconsistent. Execute the firmware restore to restore the original firmware, or contact your service provider for recovery." |
0x25 |
|
"The post-install script failed." |
0x26 |
|
"Reload (partition) failed." |
0x27 |
|
"Primary kernel partition is inconsistent. Contact your service provider for recovery." |
0x28 |
|
"The pre-install script failed." |
0x29 |
|
"Failed to install RPM package." |
0x2b |
|
"Cannot downgrade directly to this version. Downgrade to an intermediate version and then download the desired version." |
0x2c |
|
"Failed to validate firmware signature." |
0x3e |
|
"Failed to swap the firmware partitions." |
0x40 |
|
"Failed to load the PROM image. Contact your service provider for assistance." |
0x41 |
Recommended Action: Execute the show firmwaredownloadstatus command for more information. Restart the firmware operation if needed.
Message:Firmware download completed successfully on <slot/partition>.
Message Type:AUDIT | LOG
Class: FIRMWARE
Severity: INFO
Probable Cause: Indicates that the specified firmware download has completed successfully on the specified slot or partition.
Recommended Action: No action is required.
Execute the show firmwaredownloadstatus command for more information. Execute the show version to verify the firmware version.
Message: Firmware download <failed or failed but recovered> on <node name> with error (<error code>).
Message Type: AUDIT | LOG
Class: FIRMWARE
Severity: CRITICAL
Probable Cause: Indicates that firmware download has failed on the specified slot. The error code indicates the reason for the failure.
| Error message | Error code |
|---|---|
|
"No error." |
0x0 |
|
"Upgrade is inconsistent." |
0x10 |
|
"OSRootPartition is inconsistent." |
0x11 |
|
"Unable to access the package list file. Check whether the file name is specified properly." |
0x12 |
|
"Red Hat package manager (RPM) package database is inconsistent. Contact your service provider for recovery." |
0x13 |
|
"Out of memory." |
0x14 |
|
"Failed to download RPM package. Check if the firmware image is accessible." |
0x15 |
|
"Unable to create firmware version file." |
0x16 |
|
"Unexpected system error." |
0x17 |
|
"Another firmware download is in progress." |
0x18 |
|
"Error in releasing lock device." |
0x19 |
|
"firmware commit failed." |
0x1a |
|
"Firmware directory structure is not compatible. Check whether the firmware is supported on this platform." |
0x1b |
|
"Failed to load the Linux kernel image. Contact your service provider to assistance." |
0x1c |
|
"OSLoader is inconsistent. |
0x1d |
|
"New image has not been committed. Execute the firmware commit command or the firmware restore and firmware download commands." |
0x1e |
|
"firmware restore is not needed." |
0x1f |
|
"Images are not mounted properly." |
0x20 |
|
"Unable to uninstall old packages. Contact your service provider for assistance." |
0x21 |
|
"firmware download has timed out." |
0x23 |
|
"Out of disk space." |
0x24 |
|
"Primary filesystem is inconsistent. Execute the firmware restore to restore the original firmware, or contact your service provider for recovery." |
0x25 |
|
"The post-install script failed." |
0x26 |
|
"Reload (partition) failed." |
0x27 |
|
"Primary kernel partition is inconsistent. Contact your service provider for recovery." |
0x28 |
|
"The pre-install script failed." |
0x29 |
|
"Failed to install RPM package." |
0x2b |
|
"Cannot downgrade directly to this version. Downgrade to an intermediate version and then download the desired version." |
0x2c |
|
"Failed to validate firmware signature." |
0x3e |
|
"Failed to swap the firmware partitions." |
0x40 |
|
"Failed to load the PROM image. Contact your service provider for assistance." |
0x41 |
Recommended Action: Execute the show firmwaredownloadstatus command for more information. Execute the power-off and power-on commands on the slot for recovery.
Message: Firmware upgrade session (<session ID>: <session subject>) starts.
Message Type: AUDIT | LOG
Class: FIRMWARE
Severity: WARNING
Probable Cause: Indicates that firmware upgrade has started.
Recommended Action: No action is required.
Message: Firmware upgrade session (<session ID>: <session subject>) completes.
Message Type: AUDIT | LOG
Class: FIRMWARE
Severity: WARNING
Probable Cause: Indicates that firmware upgrade has completed successfully.
Recommended Action: Execute the show firmwaredownloadstatus command for more information.
Message: Firmware upgrade session (<session ID>: <session subject>) failed but recovered.
Message Type: LOG
Class: FIRMWARE
Severity: WARNING
Probable Cause: Indicates that firmware upgrade has failed but was recovered.
Recommended Action: Execute the show firmwaredownloadstatus command for more information.
Execute the firmware download command again if needed.
Message: Firmware upgrade session (<session ID>: <session subject>) failed.
Message Type: LOG
Class: FIRMWARE
Severity: CRITICAL
Probable Cause: Indicates that firmware upgrade has failed.
Recommended Action: Execute the show firmwaredownloadstatus command for more information.
Execute the firmware download command again if needed.
Message: Firmware upgrade session (<session ID>: <session subject>) aborted.
Message Type: LOG
Class: FIRMWARE
Severity: CRITICAL
Probable Cause: Indicates that firmware upgrade has been aborted.
Recommended Action:
Execute the firmware download command again if needed.
Message: Firmware upgrade session (<session ID>: <session subject>) has completed the installation successfully.
Message Type: LOG
Class: FIRMWARE
Severity: WARNING
Probable Cause: Indicates that firmware upgrade has completed.
Recommended Action: No action is required.