Message: QoS initialized successfully.
Message Type:LOG
Severity:INFO
Probable Cause: Indicates that the Data Center Ethernet (DCE) QoS has been initialized.
Recommended Action: No action is required.
Message:Failed to allocate memory: (<function name>).
Message Type: LOG
Severity: ERROR
Probable Cause: Indicates that the specified function has failed to allocate memory.
Recommended Action: Check the memory usage on the switch using the show process memory command.
Restart or power cycle the switch.
Message: QoS startup failed.
Message Type:LOG
Severity:ERROR
Probable Cause: Indicates that Data Center Ethernet (DCE) QoS encountered an unexpected severe error during basic startup and initialization.
Recommended Action: Restart or power cycle the switch. If the problem persists, download a new firmware version using the firmware download command.
Message: Interface <interface_name> is not allowed to come up as ISL because of Long Distance ISL restriction. Shutting down interface.
Message Type:LOG
Severity:ERROR
Probable Cause: Indicates that the interface could not come up as inter-switch link (ISL) because only regular ISL is allowed for 2 Km and 5 Km distant links. The interface has been automatically shut down.
Recommended Action: No action is required.
Message: sFlow profile <sflow-profile-name> is not present.
Message Type:DCE
Severity:ERROR
Probable Cause: Indicates that the specified sFlow profile is not configured on the system.
Recommended Action: No action is required.
Message: Classmap <class-map_name> is already applied on RBridge in dir <direction> through policy-map <policy-map_name>.
Message Type: DCE
Severity:ERROR
Probable Cause: Indicates that the specified class-map is already applied on the RBridge.
Recommended Action: No action is required.
Message: <BUM_protocol_name> traffic rate has been exceeded on interface <interface_name>.
Message Type: DCE
Severity:INFO
Probable Cause: Indicates that the broadcast, unknown unicast, and multicast (BUM) monitor routine has detected a rate violation.
Recommended Action: No action is required.
Message: <BUM_protocol_name> traffic rate returned to conforming on interface <interface_name>.
Message Type:DCE
Severity:INFO
Probable Cause:Indicates that broadcast, unknown unicast, and multicast (BUM) storm control has detected that the traffic rate has returned to the normal limit on the specified interface.
Recommended Action: No action is required.
Message: <BUM_protocol_name> traffic rate has been exceeded interface <interface_name>. Interface will be shut down.
Message Type:DCE
Severity:INFO
Probable Cause:Indicates that the broadcast, unknown unicast, and multicast (BUM) monitor routine has detected a rate violation.
The interface has been shut down.
Recommended Action: Disable BUM storm control on the interface using the no storm-control ingress command; then re-enable the interface (using the no shutdown command) and BUM storm control
(using the storm-control ingress command).
Message: The configured CIR/EIR is less than the minimum supported CIR/EIR (<MinSupportedInformationRate> bps) of this platform, the operational CIR/EIR will be 0.
Message Type:DCE
Severity:INFO
Probable Cause:Indicates that the configured CIR/EIR is less than the supported operation range of platform results in complete drop of traffic matching the policer entry.
Recommended Action: No action is required.
Message: Tail drops detected on interface <interface_name>.
Message Type: DCE
Severity: INFO
Probable Cause: Indicates that tail drops are detected on the specified interface.
Recommended Action: No action is required.
Message: RED drops detected on interface <interface_name>.
Message Type:DCE
Severity:INFO
Probable Cause: Indicates that red drops are detected on the specified interface.
Recommended Action: No action is required.
Message: Exceed QOS resources when adding
member interface <interface_name> to lag
<Lag_name>.
Message Type:DCE
Severity:INFO
Probable Cause: Space is not available on
chip to create new qos maps.
Recommended Action: No action required.
Message: Failed to inherit cos mutation map from parent lag <Lag_name> to member interface <interface_name>.
Message Type:DCE
Severity:INFO
Probable Cause: Space is not available on
chip to create new qos maps.
Recommended Action: No action is required.
Message: Failed to inherit cos tc map from parent lag <Lag_name> to member interface <interface_name>.
Message Type:DCE
Severity:INFO
Probable Cause: Space is not available on
chip to create new qos maps.
Recommended Action: No action is required.