ExtremeWireless™ AP510e
>
Install the Access Point
> Mount the access point to a Beam
Published April 2023
Search this document
Print this page
Email this page
View PDF
Previous
Next
Preface
Text Conventions
Providing Feedback to Us
Getting Help
Documentation and Training
Overview
New in this Guide
AP510e Features
AP510e Powering Methods
AP510e LEDs Status
Install the Access Point
Verify the Box Contents
Mount and Connect the AP
Mounting Brackets and Accessories Usage
Mount the AP on a Dry or Wood Wall/Solid Flat Ceiling
Mount the access point to a wall using the Main Mounting Bracket
Install a Security Torx Locking Screw
Mount the AP to a wall using the WS-MBI-WALL04 bracket
Mount the AP onto a wall using the Main Mounting Bracket and the Flat Metal Easy-Attach adaptor
Mount the access point to a wall using the Phillips pan-head screws
Mount to a Suspended/Drop Ceiling
Mount the access point using the Main Mounting Bracket to a Flat T-bar
Mounting the access point using the Main Mounting Bracket with KT-135628-01 adaptor to a flat T-bar
Mounting the access point using the WS-MBI-DCFLUSH Bracket to a flat T-bar
Mounting the AP using the WS-MBI-DCMTR01 Bracket
Mount the AP to a Junction/Gang box
Mount the access point to a Beam
Install the AIO-DQ15021-RPSMA Antenna
Antenna Information
Supported Antennas
Operational Description of Antenna Configuration and RF Output Power Setting
Antenna configurations for external antenna models
AP510e Antenna Information
Specifications
Regulatory and Compliance Information
Safety Guidelines
FCC Declaration of Conformity Statement
FCC Radiation Exposure Statement
FCC OEM Integrator Note
Industry Canada Notice
Detachable Antenna Usage
Korea BLE Antennas Support
Supplement to Product Instructions
NCC Statement
Brazil Agência Nacional De Telecomunicações (Anatel) Statement
MPE Distance - Mobile Devices
CE Statement
European Waste Electrical and Electronic Equipment (WEEE) Notice
Hazardous Substances
Declaration of Conformity in Languages of the European Community
Mount the access point to a Beam
About this task
The access point can be mounted onto a beam using a beam clip accessory (BRKT-000147A-01) to the main mounting bracket.
Pre-Installation checklist:
The beam must be able to support the access point in all environmental conditions.
The beam should be flat.
Before attaching the AP onto a beam, verify that:
Beam attachment area is at least 0.5” (12.7 mm) wide and as long as the access point's largest dimension.
Beam mounting surface is less than 0.650” (16.5 mm) thick.
Procedure
Attach the beam clip accessory, BRKT-000147A-01 to the main mounting bracket by placing it between the center hinges of the main mounting bracket.
Beam clip accessory, BRKT-000147A-01
Using a twisting motion between the main mounting bracket hinges, attach the beam clip accessory
Attaching the beam clip accessory to the main mounting bracket
Attach the main mounting bracket with the beam clip accessory to the access point.
Place the beam clip accessory on a beam in such a way that there is enough space between the screw and clamp to be tightened.
Attaching the beam clip accessory to the beam
Use the screw and clamp on the top of the beam clip accessory to secure the access point in place on the beam.
Insert the Ethernet plug into the LAN port.
