ExtremeWireless™ AP510e
>
Install the Access Point
> Mount the AP on a Dry or Wood Wall/Solid Flat Ceiling
Published April 2023
Search this document
Print this page
Email this page
View PDF
Previous
Next
Preface
Text Conventions
Providing Feedback to Us
Getting Help
Documentation and Training
Overview
New in this Guide
AP510e Features
AP510e Powering Methods
AP510e LEDs Status
Install the Access Point
Verify the Box Contents
Mount and Connect the AP
Mounting Brackets and Accessories Usage
Mount the AP on a Dry or Wood Wall/Solid Flat Ceiling
Mount the access point to a wall using the Main Mounting Bracket
Install a Security Torx Locking Screw
Mount the AP to a wall using the WS-MBI-WALL04 bracket
Mount the AP onto a wall using the Main Mounting Bracket and the Flat Metal Easy-Attach adaptor
Mount the access point to a wall using the Phillips pan-head screws
Mount to a Suspended/Drop Ceiling
Mount the access point using the Main Mounting Bracket to a Flat T-bar
Mounting the access point using the Main Mounting Bracket with KT-135628-01 adaptor to a flat T-bar
Mounting the access point using the WS-MBI-DCFLUSH Bracket to a flat T-bar
Mounting the AP using the WS-MBI-DCMTR01 Bracket
Mount the AP to a Junction/Gang box
Mount the access point to a Beam
Install the AIO-DQ15021-RPSMA Antenna
Antenna Information
Supported Antennas
Operational Description of Antenna Configuration and RF Output Power Setting
Antenna configurations for external antenna models
AP510e Antenna Information
Specifications
Regulatory and Compliance Information
Safety Guidelines
FCC Declaration of Conformity Statement
FCC Radiation Exposure Statement
FCC OEM Integrator Note
Industry Canada Notice
Detachable Antenna Usage
Korea BLE Antennas Support
Supplement to Product Instructions
NCC Statement
Brazil Agência Nacional De Telecomunicações (Anatel) Statement
MPE Distance - Mobile Devices
CE Statement
European Waste Electrical and Electronic Equipment (WEEE) Notice
Hazardous Substances
Declaration of Conformity in Languages of the European Community
Mount the AP on a Dry or Wood Wall/Solid Flat Ceiling
About this task
The access point is installed on drywall or wood wall or to a solid flat ceiling using:
#37201, stainless-steel main mounting bracket that ships with the unit
#30516, WS-MBI-WALL04 bracket, two Phillips pan-head screws, and screw-in anchors
Note
The WALL04 bracket, screws, and screw-in anchors are used for drywall mounting. For wood wall mounting, only the WALL04 bracket and screws are used.
#37201, stainless-steel main mounting bracket with #37210, flat metal easy-attach adapter
Phillips pan head screws
Tip
The best practice is to install the access point using the mounting brackets.
