Operational Description of Antenna Configuration and RF Output Power Setting

Per KDB 353028 D01 Antennas Part 15 Transmitters v01 requirement, Applications must contain an exhibit listing each antenna, the antenna gain, antenna type, antenna manufacturer/vendor, and output power that can be used for the device. To comply with this requirement, refer to the following information.

Approved Antenna List

Table 1. Approved Antenna List
Frequency band Antenna type Model Antenna gain 2.4G Antenna gain 5G Cable loss 2.4G Cable loss 5G True gain 2.4G True gain 5G
2.4G/5G Omni ML-2452-APA2-01 3.17 4.85 1 2 2.17 2.85
2.4G/5G Omni ML-2452-APA2-02 3.17 4.85 1 2 2.17 2.85
2.4G/5G Omni ML-2452-HPA5-036 3.9 5.7 1 2 2.9 3.7
2.4G/5G Omni ML-2452-HPAG4A6-01 4 7.3 1 2 3 5.3
2.4G/5G Panel ML-2452-PNA5-01R 4.5 5 1 2 3.5 3
2.4G/5G Omni ML-2452-HPAG5A8-01 5 8 1 2 4 6
2.4G/5G Omni ML-2452-PTA4M4-036 5 6.6 1 2 4 4.6
2.4G/5G Omni WS-AO-DQ04360N 5.5 6 1 2 4.5 4
2.4G/5G Panel ML-2452-SEC6M4-036 6.92 7.23 1 2 5.92 5.23
2.4G/5G Panel WS-AI-DQ05120 6.9 7.23 1 2 5.92 5.23
2.4G(BT/Thread)/5G Panel ML-2452-PNA7-01R 7.8 10.7 1 2 6.8 8.7
2.4G(BT/Thread) Omni ML-2499-HPA8-01 8 - 1 2 7 -
2.4G/5G Omni AI-DQ04360S 5.5 6 1 2 4.5 4
5G Omni AIO-DQ15021-RPSMA - 15 - 2 - 13
Note: The AIO-DQ15021-RPSMA antenna is only supported on the AP510e. It is supported on ExtremeCloud™ IQ Controller and it is intended for indoor stadiums and arenas for a campus mode deployment only. It is available in US and Canada only and only in 5G.