The following accessories are supported on the AP5022, AP5022S6D and AP5022FX.
The following antennas are compatible with the AP5022FX .
Note
For WiFi 6GHz Standard power access points: The antenna height shall be determined by the installer or operator of the standard-power access point or fixed client device, or by automatic means. This information shall be stored internally in the device. Provision of accurate device information is mandatory.| Part Number | Description |
|---|---|
| ACC-CBL-BRKOUT-12RPSMA (Breakout cable AP5022FX spare) | 12 RPSMA Port Breakout antenna cable for AP5022FX using LMR-100 cable and 9" long. May be installed on a pole/wall. |
| AI-TS06360 | 3dBi (2.4 GHz) and 5dBi (5 and 6 GHz) Indoor Dipole Tri-band with RP-SMA connector. IoT only. |
| AI-TQ08055 | 7dBi (2.4 GHz) and 6dBi (5 and 6 GHz) Indoor Quad Sector 2.4GHz 65 Degrees and 5GHz 55 Degrees Tri-band with attached 1 meter 4-port RP-SMA cable. Mount included. |
| AIO-DQ15021-RPSMA | 15 dBi Indoor/Outdoor Four-port, 2.4GHz and 5GHz, Directional 21 Degree with 36-inch RPSMA cable. |
| AIO-HQ17020 | 17dBi (5 and 6 GHz) Indoor Quad Directional 20 Degree with detachable 1 meter 4-port RP-SMA cable. Mount included. |
| AI-TQ06120 | 6dBi Indoor Quad Sector 120 Degree Tri-band with attached 1 meter 4-port RP-SMA cable. Mount included. |
Use the following accessories to mount your AP.
| Part Number | Description | Notes |
|---|---|---|
| AH-ACC-BKT-AX-TB | Mounting bracket for Prelude 15/16 in. and Suprafine 9/16 in. ceilings and walls. |
Ships with AP5022 Can be used for wall - 0.25 in. |
| AH-ACC-BKT-AX-WL | Mounting bracket for direct-to-wall installations. | Can be used for wall - 1.25 in. |
| AH-ACC-BKT-AX-IL | Mounting bracket for Interlude ceilings. | |
| AH-ACC-BKT-AX-SL | Mounting bracket for Armstrong 1/8 in. and 1/4 in. main beam. Silhouette reveal ceiling grids. | Up to 0.33 in. ceiling tile protrusion. |
| ACC-BKT-AX-JB | Junction box or wall mounting for indoor APs. | Gang/junction box. |
| ACC-BKT-AX-BEAM | Beam mounting for indoor APs. | Up to 0.78 in. thick beam. |
| AH-ACC-BKT-916-KIT | 9/16 in. ceiling mount brackets for non-flat/protruded ceiling tiles - use with AH-ACC-BKT-AX-TB. | 9/16 in. non-flat/protruded ceiling tiles. |
| ACC-BKT-TB-NF | Adapter bracket AH-ACC-BKT-TB for 15/16 in. wide t-bars non-flat/protruded ceiling tiles. | 5/16 in.wide t-bars non-flat/protruded ceiling tiles. |
| ACC-BKT-AX-WNGADAPT | Adapter bracket for cloud AP to wing mounting plate (#37201). 10 pack. | Allow twist mount to mount to legacy mounts. |
The following power accessories are compatible with your AP.
| Part Number | Description |
|---|---|
| 37219 | PWR adapter 12V DC, 3A, 2.5 mm x 5.5 mm connector. |
The following accessories are available for use on the AP.
| Part Number | Description |
|---|---|
| ACC-WIFI-MICRO-USB | Micro-USB to USB console adapter cable for Extreme wireless APs. |