ap7502

Adds an AP7502 to the network. If a profile for the AP is not available, a new profile is created.

Supported in the following platforms:

  • Access Point — AP7502, AP8432, AP8533
  • Wireless Controllers — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

ap7502 <MAC>

Parameters

ap7502 <MAC>
<MAC> Specify the AP7502's MAC address.

Examples

rfs4000-6DB5D4(config)#ap7502 00-23-68-99-BF-A8
rfs4000-6DB5D4(config-device-00-23-68-99-BF-A8)#show context
ap7502 00-23-68-99-BF-A8
 use profile default-ap7502
 use rf-domain default
 hostname ap7502-99BFA8
 mint mlcp vlan
 mint mlcp ip
 use radius-server-policy eap
 interface radio1
  rf-mode 2.4GHz-wlan
  wlan open_test bss 1 primary
 interface radio2
  rf-mode 5GHz-wlan
  wlan open_test bss 1 primary
rfs4000-6DB5D4(config-device-00-23-68-99-BF-A8)#
rfs4000-6DB5D4(config)#show wireless ap configured
------------------------------------------------------------------------------------------
 IDX       NAME            MAC             PROFILE       RF-DOMAIN       ADOPTED-BY
------------------------------------------------------------------------------------------
  1 ap7502-99BFA8  00-23-68-99-BF-A8   default-ap7502    default     00-15-70-6D-B5-D4
------------------------------------------------------------------------------------------
rfs4000-6DB5D4(config)#

Related Commands

no (global-config-mode) Removes an AP7502 from the network