Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

connect (user and privi exec modes)

Begins a console connection to a remote device using the remote device's MiNT ID or name
Note

Note

This command command and its syntax is common to both the User Executable and Privilege Executable configuration modes.

Supported in the following platforms:

  • Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
  • Wireless Controller — RFS4010
  • Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

connect [mint-id <MINT-ID>|<REMOTE-DEVICE-NAME>]

Parameters

connect [mint-id <MINT-ID>|<REMOTE-DEVICE-NAME>]

mint-id <MINT-ID>

Connects to the remote system using its MiNT ID

  • <MINT-ID> – Specify the remote device's MiNT ID.

<REMOTE-DEVICE-NAME>

Connects to the remote system using its name

  • <REMOTE-DEVICE-NAME> – Specify the remote device's name.

Examples

NOC-NX9500>show mint lsp-db
5 LSPs in LSP-db of 19.6C.88.09:
LSP 19.6C.88.09 at level 1, hostname "NOC-NX9500", 2 adjacencies, seqnum 1518782
LSP 19.6D.B5.D4 at level 1, hostname "RFS6K-SITE2-VLAN192", 2 adjacencies, seqnum 1971569
LSP 19.74.B4.5C at level 1, hostname "ap8132-74B45C", 1 adjacencies, seqnum 1741167
LSP 4D.83.30.A4 at level 1, hostname "ap7522-8330A4", 1 adjacencies, seqnum 518868
LSP 70.38.06.49 at level 1, hostname "RFS6K-SITE1-VLAN20", 2 adjacencies, seqnum 1389974
NOC-NX9500>
NOC-NX9500>connect mint-id 19.74.B4.5C

Entering character mode
Escape character is '^]'.

AP8432 release 5.9.4.0-029R
ap8432-74B45C login:
Published June 2019prev | next
Published June 2019prev | next

Email this topicEmail this topic

Print this pagePrint this page