traceroute6 (user-privi-exec-mode)
Traces the route to a specified IPv6 destination
Note
This command and its syntax is common to both the
User Executable and
Privilege
Executable configuration modes.
Supported in the following platforms:
- Access Points — AP7502, AP7522,
AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
- Wireless Controller — RFS4010
- Service Platforms — NX5500, NX7500,
NX9500, NX9600, VX9000
Syntax
traceroute6 <LINE>
Parameters
traceroute6 <LINE>
| traceroute6 <LINE> |
Traces the route to a destination IPv6 address or
hostname
- <LINE> – Specify the destination IPv6 address or hostname.
|
|
Example (User Exec Mode)
rfs4000-6DB5D4>traceroute6 2001:10:10:10:10:10:10:1
traceroute to 2001:10:10:10:10:10:10:1 (2001:10:10:10:10:10:10:1) from 2001:10:10:10:10:10:10:2, 30 hops max, 16 byte packets
1 2001:10:10:10:10:10:10:1 (2001:10:10:10:10:10:10:1) 6.054 ms 0.448 ms 0.555 ms
rfs4000-6DB5D4>
Example (Privi Exec Mode)
rfs4000-229D587#traceroute6 2001:10:10:10:10:10:10:2
traceroute to 2001:10:10:10:10:10:10:2 (2001:10:10:10:10:10:10:2) from 2001:10:10:10:10:10:10:1, 30 hops max, 16 byte packets
1 2001:10:10:10:10:10:10:2 (2001:10:10:10:10:10:10:2) 0.622 ms 0.497 ms 0.531 ms
rfs4000-229D58#
Print
this page
Email this topic
Feedback
View PDF
Download EPUB