boot

Displays a device‘s boot configuration. Use this command to view the primary and secondary image details, such as Build Date, Install Date, and Version. This command also displays the current boot and next boot information.

Supported in the following platforms:

• Access Points — AP7502, AP7522, AP7532, AP7562, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8432, AP8533
• Wireless Controller — RFS4010
• Service Platforms — NX5500, NX7500, NX9500, NX9600, VX9000

Syntax

show boot {on <DEVICE-NAME>}

Parameters

show boot {on <DEVICE-NAME>}

Examples

ap8432-5C63F0#show boot
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       04/04/2019 23:45:30     02/14/2019 12:52:42     5.9.5.0-001D
  Secondary     03/12/2019 23:57:24     01/19/2019 13:25:26     5.9.4.0-019B
--------------------------------------------------------------------------------
Current Boot       : Secondary
Next Boot          : Primary
Software Fallback  : Enabled
ap8432-5C63F0#

nx9500-6C8809#show boot on ap7562-84A224
--------------------------------------------------------------------------------
     IMAGE            BUILD DATE             INSTALL DATE          VERSION
--------------------------------------------------------------------------------
  Primary       04/05/2019 00:45:49     04/09/2019 12:35:32     5.9.5.0-001D
  Secondary     01/30/2019 02:30:04     02/03/2019 23:55:14     5.9.4.0-010D
--------------------------------------------------------------------------------
Current Boot       : Primary
Next Boot          : Primary
Software Fallback  : Enabled
VM support         : Not present
nx9500-6C8809#