file-sync (user and privi exec modes)

• trustpoint – Cancels scheduled trustpoint synchronization on a specified device, all devices, or devices within a specified RF Domain
• wireless-bridge – Cancels scheduled wireless-bridge certificate synchronization on a specified device, all devices, or devices within a specified RF Domain
  • <DEVICE-NAME> – Cancels scheduled trustpoint/certificate synchronization on a specified device. Specify the device‘s hostname or MAC address.
  • all – Cancels scheduled trustpoint/certificate synchronization on all devices
  • rf-domain [<DOMAIN-NAME>|all] – Cancels scheduled trustpoint/certificate synchronization on all devices in a specified RF Domain or in all RF Domains
    • <DOMAIN-NAME> – Cancels scheduled trustpoint/certificate synchronization within a specified RF Domain. Specify the RF Domain‘s name.
    • all – Cancels scheduled trustpoint/certificate synchronization on all RF Domains

• trustpoint – Loads the trustpoint, including CA certificate, server certificate and private key
• wireless-bridge – Loads the wireless-bridge certificate to the staging controller. Use this command to load the certificate to the controller before scheduling or initiating a certificate synchronization.
  • <URL> – Provide the trustpoint/certificate location using one of the following formats:

    tftp://<hostname|IP>[:port]/path/file

    ftp://<user>:<passwd>@<hostname|IP>[:port]/path/file

    sftp://<user>:<passwd>@<hostname|IP>[:port]>/path/file

    http://<hostname|IP>[:port]/path/file

    Note: Both IPv4 and IPv6 address types are supported.

    cf:/path/file

    usb<n>:/path/file

• trustpoint <TRUSTPOINT-NAME> – Syncs a specified trustpoint between controller and its adopted devices
  • <TRUSTPOINT-NAME> – Specify the trustpoint name.
  Note: Starting with WiNG 5.9.4, the trustpoint will be synced all the way down the hierarchical structure. If you issue the command on the NOC controller, the specified trustpoint will be synced with the site controllers and its adopted APs.
• wireless-bridge – Syncs wireless-bridge certificate between controller and its adopted devices

  After specifying the file that is to be synced, configure following file-sync parameters:

  • <DEVICE-NAME> – Syncs trustpoint/certificate with a specified AP. Specify the device‘s hostname or MAC address.
  • all – Syncs trustpoint/certificate with all devices
  • rf-domain [<DOMAIN-NAME>|all] from-controller – Syncs trustpoint/certificate with all devices in a specified RF Domain or in all RF Domains
    • <DOMAIN-NAME> – Select to sync with APs within a specified RF Domain. Specify the RF Domain‘s name.
    • all – Select to sync with APs across all RF Domains
    • from-controller – Optional. Loads certificate to the APs from the adopting controller and not the RF Domain manager

      After specifying the access points, specify the following options: reset-radio and upload-time.

Optional. Resets the radio after file synchronization. Reset the radio in case the certificate is renewed along with no changes made to the ‘bridge EAP username‘ and ‘bridge EAP password‘.

• upload-time – Optional. Schedules certificate upload at a specified time
  • <TIME> – Specify the time in the MM/DD/YYYY-HH:MM or HH:MM format. If no time is configured, the process is initiated as soon as the command is executed.